3D Hangouts

3D Hangouts – Canary Light, Foldable Cases, Ultra Hand, Adabot, Benchy Storage and Korok Planter

31 May 2023

Contributed by Lukas

This week @adafruit we’re checking out the IoT canary night light. Prototyping the Ultra Hand from Zelda TOTK and an all new Adabot RP2040. Layer a ...

3D Hangouts – EPCOT Ball, IoT Canary and Flexi Yoshi

17 May 2023

Contributed by Lukas

This week @adafruit we’re celebrating 400 episodes! This week’s epic project is the EPCOT spaceship earth NeoPixel project. Taking a look at the I...

3D Hangouts – Bo Katan Headband, IoT Canary, and Snap Fit Cases

10 May 2023

Contributed by Lukas

This week @adafruit we’re making an LED headband inspired by Bo Katan from Star Wars. Taking a look at the EPCOT project. Checking out a snap fit ca...

3D Hangouts – Bo Katan Headband, IoT Canary, and Snap Fit Cases

09 May 2023

Contributed by Lukas

This week @adafruit we’re making an LED headband inspired by Bo Katan from Star Wars. Taking a look at the EPCOT project. Checking out a snap fit ca...

3D Hangouts – Feather USB Host, IoT Canary Light, Storage Box and Bowser Ring

03 May 2023

Contributed by Lukas

This week @adafruit we’re making a snap fit case for Feather USB Host. Prototyping an IoT canary night light and an LED headband inspired by Bo Kata...

3D Hangouts – Pi Camera Rig, Epcot WLED and Hellhound

19 Apr 2023

Contributed by Lukas

This week @adafruit we’re making a timelapse camera rig with Pi camera V3. Taking a look at WLED with the EPCOT spaceship earth project. Prototyping...

3D Hangouts – Hexpad, Clear Prints, Spaceship Earth and X Wings

05 Apr 2023

Contributed by Lukas

This week @adafruit we’re checking out John Park’s Hexpad MIDI controller. Taking a look at the EPCOT spaceship earth work in progress. Checking o...

3D Hangouts – Wearable AQI, Spaceship Earth and Mythosaur

29 Mar 2023

Contributed by Lukas

This week @adafruit we’re making a wearable air quality device with Feather ESP32-S3 and CircuitPython. Prototyping a replica of the Spaceship Earth...

3D Hangouts – Desktop Air Quality Sensor, Polyhedrons and Cardinal

22 Mar 2023

Contributed by Lukas

This week @adafruit we’re prototyping new projects. Designing a retro inspired case for a desktop air quality sensor. Modeling polyhedrons for an Ep...

3D Hangouts - Star Fragment Lamp, Resin Prints and Mushroom Storage

15 Mar 2023

Contributed by Lukas

This week @adafruit we’re 3D printing an IoT Star Fragment lamp with NeoPixels and QT Py ESP32 inspired by Zelda and Animal Crossing. Checking out r...

3D Hangouts – TRON Disc, Star Fragment Lamp and Shoe Organizer

08 Mar 2023

Contributed by Lukas

This week @adafruit we’re 3D printing a prop inspired by TRON! Prototyping a Star Fragment lamp with NeoPixels and QT Py ESP32 inspired by Zelda and...

3D Hangouts – Floppy PyPortal, TRON Disk, MIDI Hexpad and Ammonite

01 Mar 2023

Contributed by Lukas

This week @adafruit we’re making a floppy disk USB drive with Pyortal and CircuitPython! Updates to the TRON inspired prop and hexagon MIDI controll...

3D Hangouts – Feather TFT, Floppy PyPortal and Helical Heart

15 Feb 2023

Contributed by Lukas

This week @adafruit we’re making a stand for the Feather ESP32-S2 Reverse TFT. Prototyping a snap fit case for the PyPortal in the shape of a floppy...

3D Hangouts – Rocket Lamp, Magnetic USB and Heart of TeFiti

08 Feb 2023

Contributed by Lukas

This week @adafruit we’re making a rocket lamp with the Feather RP2040 and PropMaker FeatherWing. Prototyping a stand for the Feather ESP32 with Rev...

3D Hangouts – Holiday Tree, Rocket Lamp and Dog Coat Rack

01 Feb 2023

Contributed by Lukas

This week @adafruit we’re making a holiday inspired tree using the Feather RP2040 Scorpio. Prototyping a rocket lamp with the PropMaker FeatherWing....

3D Hangouts – Scorpio Case, Rocket Lamp, Parametric Pegboard and Boxy Boo

25 Jan 2023

Contributed by Lukas

This week @adafruit we’re making a snap fit case for the Feather RP2040 Scorpio. Prototyping a rocket lamp with the PropMaker FeatherWing and a para...

3D Hangouts – 3D PCBs, Scorpio RP2040 Case and Huggy Wuggy

18 Jan 2023

Contributed by Lukas

This week @adafruit we’re learning how to make 3D models of PCB using Fusion 360 and Eagle. Prototyping a snap fit case for the Feather RP2040 Scorp...

3D Hangouts – Countdown Clock, Owl and Tree with Shoes

21 Dec 2022

Contributed by Lukas

This week @adafruit we’re making an IoT countdown clock with QT Py ESP32, alphanumeric displays and CircuitPython! Prototyping a print-in-place owl ...

3D Hangouts – iBook iPad Case, Countdown Clock and Candelarbol

14 Dec 2022

Contributed by Lukas

This week @adafruit we’re retro fitting an iPad Pro into an iBook G3 with 3D printing! Prototyping a countdown event clock with alphanumeric segment...

3D Hangouts – Noodle Snowflake, Countdown Clock and Knitted Stocking

07 Dec 2022

Contributed by Lukas

This week @adafruit we’re making a glowing snowflake ornament with LED noodles! Prototyping a countdown event clock with alphanumeric segment displa...

3D Hangouts – MicroLipo Charger, Noodle Snowflake, Flexi Yeti and Turkey Leg

30 Nov 2022

Contributed by Lukas

This week @adafruit we’re making a case for the MicroLipo V2! Prototyping a festive project using LED noodles. Timelapse this week features an artic...

3D Hangouts – Noodle Sign, Pool Monitor, Nose Box and Truss Tree

16 Nov 2022

Contributed by Lukas

This week @adafruit we’re catching up on past projects and showcasing an LED noodle sign for a LEGO build and a Pool Monitor powered by WipperSnappe...

3D Hangouts - IoT Soil Sensing, Hipster Ghost and Flying Ghost

19 Oct 2022

Contributed by Lukas

This week @adafruit we’re making an IoT soil sensor node in WipperSnaper using Adafruit IO. Prototyping a hipster ghost neon sign using LED animatio...

3D Hangouts - Earphone Case, IoT Soil Sensing and Jumping Ghost

12 Oct 2022

Contributed by Lukas

This week @adafruit we’re 3D printing a flexible earphone case! Checking out stemma soil sensors in WipperSnaper usigng Adafruit IO. Prototyping a D...

3D Hangouts - IoT Canary, LED Noodles and Potion Bottles

21 Sep 2022

Contributed by Lukas

This week @adafruit we’re making a CO2 sensing canary with Adafruit IO. Prototyping glowy projects using new LED noodles. Timelapse this week featur...

3D Hangouts - CAD Parts, MP3 Players, IoT Birds, and Skull Planters

14 Sep 2022

Contributed by Lukas

This week @adafruit we’re chatting about cad parts repo on github. Prototyping an iot C02 sensing canary bird in the mines. Showcasing an MP3 audio ...

3D Hangouts - Pi Media Server, Kumiko Vase and Skull Dice Roller

31 Aug 2022

Contributed by Lukas

This week @adafruit we’re making a Raspberry Pi Plex media server. Prototyping a kumiko inspired vase printed in ProtoPasta wood filament. Timelapse...

3D Hangouts - Wipper Snapper, Pi Plex Server and Skull Teeth

24 Aug 2022

Contributed by Lukas

controlled room with a smart outlet and QT Py ESP32 S2. Update to our Raspberry Pi Plex media server prototype. Timelapse this week features a creepy ...

3D Hangouts - DIY Pi 400, SSD Box and Percussion Frog

17 Aug 2022

Contributed by Lukas

This week @adafruit we’re making a DIY Pi 400 with an Asus Tinker board and a wireless keyboard. Prototyping a Plex media server using Raspberry Pi ...

3D Hangouts - IOT Telegraph, DIY Pi 400, Gibson Headstock Hanger and Flamingo

10 Aug 2022

Contributed by Lukas

This week @adafruit we’re making an IOT telegraph with QT Py ESP32 S2, analog feedback servos and CircuitPython. Prototyping a DIY Pi 400 with a 3D ...

3D Hangouts – Selfie Action Figures and Stormbreaker

20 Jul 2022

Contributed by Lukas

This week @adafruit we’re making 3D selfie action figures! Learn how to use 3D scanning apps and Tinkercad to make snap-fit heads for new action fig...

3D Hangouts – Owl Remote and Articulating Excavator

13 Jul 2022

Contributed by Lukas

This week @adafruit we’re making an Owl IR TV remote with QTPy RP2040 and CircuitPython! Our shop talk showcases a Perma-Proto for modular circuits....

3D Hangouts – Droids, Owls and Inquisitor Lightsaber

06 Jul 2022

Contributed by Lukas

This week @adafruit we’re a toy droid inspired by LOLA-59 from Star Wars Kenobi. Prototyping a universal TV remote disguised as an Owl. We have two ...

3D Hangouts – Smart Mirror, Droids and UFO Fidget

22 Jun 2022

Contributed by Lukas

This week @adafruit we’re making a mini smart mirror with PyPortal and CircuitPython. More updates on the LOLA droid prototype. Timelapse this week ...

3D Hangouts – Wooden Bricks, LOLA, Quetzalcoatl and Nozzle Holder

15 Jun 2022

Contributed by Lukas

This week @adafruit we’re CNC milling wooden building bricks! Prototyping a LOLA inspired robot from Star Wars Kenobi. Double timelapses this week f...

3D Hangouts – Mini GIF Players, Wooden Building Bricks and Lego Snake

01 Jun 2022

Contributed by Lukas

This week @adafruit we’re making mini GIF players! These 3D printed cases look like a mini retro tv and portable gaming console that play animated G...

3D Hangouts – Lego Tripod, Mini TFTs and Retro VGA Cables

25 May 2022

Contributed by Lukas

This week @adafruit we’re 3D printing Lego compatible tripods adapters for mobile phones! Learn how to use your mobile phone’s camera as a webcam....

3D Hangouts – Headphone Ears, Ninjaflex Cheetah and Tardigrade

18 May 2022

Contributed by Lukas

This week @adafruit we’re 3D printing LEGO compatible accessories for headphones! Prototyping new camera tripod adapters for laptops for mobile phon...

3D Hangouts – RGB Matrix Cubes, TFT Pendants and Sea Dragons

04 May 2022

Contributed by Lukas

This week @adafruit we’re making RGB matrix cubes with the Raspberry Pi. Prototyping a nintendo switch slash steam deck inspired TFT display pendant...

3D Hangouts – Connection Machine, Soundbox, Matrix Cube and Khonshu

27 Apr 2022

Contributed by Lukas

This week @adafruit we’re making a portable sound box for bikes and scooters. Revisiting the Connection Machine build with the Raspberry Pi. Prototy...

3D Hangouts – ESP32 V2, Little Connection Machine and Dragon Hairpin

13 Apr 2022

Contributed by Lukas

This week @adafruit we’re checking out the Feather ESP32 V2. Prototyping a little connection machine and RGB matrix cube with the Raspberry Pi. The ...

3D Hangouts – MIDI Foot Pedal, Little Machine and Mini Hot Plate

06 Apr 2022

Contributed by Lukas

This week @adafruit we’re jamming out with a MIDI foot pedal. Prototyping a little connection machine inspired project for the Raspberry Pi. The tim...

3D Hangouts – LED Shoes, Chaos Emeralds and Fruit Bowls

16 Mar 2022

Contributed by Lukas

This week @adafruit we’re making NeoPixel LED Boosters for the Nike Acronym Blazer shoes. Prototyping more chaos emeralds inspired by Sonic 2 movie....

3D Hangouts – Sketch Toy, Zipper Pulls and Walking Robots

02 Mar 2022

Contributed by Lukas

This week @adafruit we’re making a sketch drawing device with CircuitPython. Prototyping zipper pulls using glow-in-the-dark powder. The timelapse t...

3D Hangouts – Floppy Drives, Etch-A-Sketch and Flexy Fish

23 Feb 2022

Contributed by Lukas

This week @adafruit we’re 3D printing cases for floppy drives. Prototyping an etch-a-sketch inspired drawing handheld using 2.4in TFT FeatherWing an...

3D Hangouts – Zoetrope, Floppy Drives and Flower Boxes

16 Feb 2022

Contributed by Lukas

This week @adafruit we’re making a zoetrope inspired art display with edge lit acrylic, CircuitPython and CRICKIT. Prototyping sleeve cases for 5in ...

3D Hangouts – Footswitches, Party Parrots and Naboo Starfighter

09 Feb 2022

Contributed by Lukas

This week @adafruit we’re making a three button footswitch with CircuitPython and QT Py RP2040. Prototyping a zoetrope with Adafruit Crickit featuri...

3D Hangouts – VU Meter, Party Parrots and Quantum Fractal Stars

02 Feb 2022

Contributed by Lukas

This week @adafruit we’re making an audio reactive light bar using NeoPixels and CircuitPython. Prototyping a zoetrope with Adafruit Crickit featuri...

3D Hangouts – TFT Feather, VU Meter and Quantum Cactus

26 Jan 2022

Contributed by Lukas

This week @adafruit we’re making a modular case for TFT Feather and Stemma QT sensors. Prototyping a VU meter using a QtPy RP2040, NeoPixels and a P...

3D Hangouts – Tusken Staff, TFT Feather and Floaty Ghost

19 Jan 2022

Contributed by Lukas

This week @adafruit we’re 3D printing a prop from Star Wars Book of Boba. Prototyping a snap fit case for the TFT Feather with new Quantum Filament....

3D Hangouts – QT Py Case, Stemma Sensors and Lego Rings

12 Jan 2022

Contributed by Lukas

This week @adafruit we’re checking out wipper snapper with QT Py ESP32-S2 and making a snap fit case. Timelapse this week is of some fashionable jew...

3D Hangouts – Elf Ears, Zoetrope and Spiral Holder

05 Jan 2022

Contributed by Lukas

This week @adafruit we’re kicking off the new year with a set of Elf Ears for ear buds. Prototyping a new Zoetrope project with acrylic and NeoPixel...

3D Hangouts – PyLeap, Edge Lit Acrylic and Thwomp

15 Dec 2021

Contributed by Lukas

This week @adafruit we’re checking out PyLeap and Glider apps for BLE circuit python devices! Prototyping a neopixel project with edge lit acrylic. ...

3D Hangouts – Giant MacroPad with KB2040 and NeoPixel Stargate

08 Dec 2021

Contributed by Lukas

This week @adafruit we’re making a giant macropad with KB2040! Sneak peek of a new camera slider. Timelapse this week is of the infamous Stargate wi...

3D Hangouts – NeoPixel Menorah, LED Ring Lamp, Hinged Dragon and Master Sword

24 Nov 2021

Contributed by Lukas

This week @adafruit we’re featuring two guides! A NeoPixel LED Ring Lamp and a NeoPixel Menorah. Back to back Timelapses of an articulating Dragon a...

3D Hangouts – Kzinti Props, NeoPixel Ornaments and Scout Synth

10 Nov 2021

Contributed by Lukas

This week @adafruit we have props inspired by Star Trek. Spotlighting a NeoPixel ornament inspired by The Green Goblin. Making tunes with the Scout Sy...

3D Hangouts –Time Stick, Pumpkin Props and Skull Necklace

27 Oct 2021

Contributed by Lukas

This week @adafruit we’re spotlighting our TVA Time Baton prop from Loki. Prototyping a new project inspired by the Pumpkin Bombs from the Green Gob...

3D Hangouts –Time Stick, Pumpkin Props and Skull Necklace

27 Oct 2021

Contributed by Lukas

This week @adafruit we’re spotlighting our TVA Time Baton prop from Loki. Prototyping a new project inspired by the Pumpkin Bombs from the Green Gob...

3D Hangouts – Wireless LEDs, Star Trek Props, Bat Beanies and Tool Bit Dentures

20 Oct 2021

Contributed by Lukas

This week @adafruit we’re checking out wireless LEDs for LEGO builds and model making. Prototyping Halloween decor in Ninjaflex and a morbid set of ...

3D Hangouts – LED Glasses and Front Man Mask

13 Oct 2021

Contributed by Lukas

This week @adafruit we’re checking out the LED Glasses. For Timelapse Tuesday, we’re spotlighting the front man’s mask from Squid Game. Learn G...

3D Hangouts – Mini LED Matrix, TVA Baton and Flexi Croc

06 Oct 2021

Contributed by Lukas

This week @adafruit we’re making an audio reactive LED matrix. For What Are You Prototyping, we have the TVA Baton from Loki with the PropMaker Feat...

3D Hangouts – LEDs, Props, Wipper Snapper and Feather Headers Jig

29 Sep 2021

Contributed by Lukas

This week @adafruit we have audio reactive LEDs! Checking out WipperSnapper beta for IoT projects. Working on new props using the PropMaker FeatherWin...

3D Hangouts – LED Glasses, Props and Masks

22 Sep 2021

Contributed by Lukas

This week @adafruit we’re making wearable spectacles for the LED Glasses with Feather RP2040. Updates to the blaster prop from Star Trek and a ghost...

3D Hangouts – Starro Mask, Blasters and Zombies

15 Sep 2021

Contributed by Lukas

This week @adafruit we’re making a Starro inspired mask with HalloWing. Prototyping a prop from Star Trek and a mini LED matrix. A zombie Captain Am...

3D Hangouts – BLE Gesture Mouse, Star Trek Melon and Eye of Agamotto

08 Sep 2021

Contributed by Lukas

This week @adafruit upcoming project of a BLE HID gesture mouse using Feather Sense and CircuitPython. Prototyping a prop from Star Trek and a light u...

3D Hangouts – Ratcatcher, MacPro Grill and Star Trek Visor

01 Sep 2021

Contributed by Lukas

This week @adafruit we’re checking out Ratcatcher’s communicator device! Prototyping a CNC milled panel for Raspberry Pi case inspired by the MacP...

3D Hangouts – Wooden Keycaps, Rat Catcher and Tentacles

25 Aug 2021

Contributed by Lukas

This week @adafruit we have CNC milled keycaps! WIP of a Rat Catcher inspired cosplay prop with Circuit Playground. And a tentacle pen holder for Time...

3D Hangouts – Emojis, Resin, Wood and Starro

18 Aug 2021

Contributed by Lukas

This week @adafruit we’re all about keycaps! Emojis, resin and wooden keycaps! Halloween season is upon us so we have a flexible Starro prop with a ...

3D Hangouts – Emoji Keypad, Resin Keycaps and Wolf Mask

28 Jul 2021

Contributed by Lukas

This week @adafruit we’re making an Emoji keypad using the 1x4 NeoKey and QTPy RP2040. Starting to experiment with resin casting keycaps for What Ar...

3D Hangouts – Braille Keycaps, Emoji Keypad and Alligator Loki

21 Jul 2021

Contributed by Lukas

This week @adafruit the MacroPad gets 3D printed braille keycaps. Using a 1x4 NeoKey and QTPy RP2040 to make an emoji keypad for What Are You Prototyp...

3D Hangouts – MacroPad, Trinkey RP2040 and Lady Loki Horns

14 Jul 2021

Contributed by Lukas

This week on @adafruit we’re checking out the MacroPad 2040! Trinkey RP2040 gets lego compatible plates for What Are You Prototyping. Lady Loki horn...

3D Hangouts - Kitty Paw, MacroPad and Marble Toy

07 Jul 2021

Contributed by Lukas

This week on @adafruit Kitty Paw Keypad with toe beans you can press! The MacroPad RP2040 gets a hinged print-in-place stand for What Are You Prototyp...

3D Hangouts – Jeopardy, Macro Pad and Lowpoly Pokeball

30 Jun 2021

Contributed by Lukas

This week on @adafruit we’re spotlighting the DIY Quiz Show Controller guide and video. Checking out the MacroPad RP2040 for What Are You Prototypin...

3D Hangouts – Fume Extractor, Jeopardy, Deco Keys and SD Card Toaster

16 Jun 2021

Contributed by Lukas

This week on @adafruit looking at the IoT smart fume extractor guide and video. Jeopardy style game with Circuit Playground for What Are You Prototypi...

3D Hangouts – Fume Extractor, Jeopardy and Mini Vise

09 Jun 2021

Contributed by Lukas

This week we’re checking out an DIY fume extractor using the FunHouse and Adafruit IO. Looking at CNC milling keycaps. Prototyping a Jeopardy style ...

3D Hangouts – Trinkeys, Fans and Giant Switches

02 Jun 2021

Contributed by Lukas

This week the Trinkeys get center stage with a project video. Updating the overly complicated fume extractor with multi-layered fans. CNC milling cust...

3D Hangouts – USB Trinkeys, FunHouse Fan and Lattice Top

26 May 2021

Contributed by Lukas

This week the Trinkeys get upgraded with 3D printed collars for secure fittings! Guide this week for a 3d printed case with cap touch buttons for the ...

3D Hangouts – FunHouse, NeoTrinkey and Gearbox

12 May 2021

Contributed by Lukas

This week we're checking out the FunHouse and printing a yellow brick road themed stand. Prototyping more updates to the NeoTrinkey case and Print-In-...

3D Hangouts – Lemon Caps, NeoTrinkeys and Grogu

05 May 2021

Contributed by Lukas

This week we're upgrading lemon keycaps with vinyl decals and chatting about fuzzy skin slicing. Prototyping an update to the NeoTrinkey case and cele...

3D Hangouts – Lemon Keypad, NeoTrinkey and Hermit Crab

28 Apr 2021

Contributed by Lukas

This week we're looking at the guide for the Lemon Keypad with QT Py RP2040. Prototyping an LED torch using the NeoTrinkey. A crabby buddy for Timelap...

3D Hangouts – Pixel Display, Lemon and Multipass

21 Apr 2021

Contributed by Lukas

This week we're looking at the guide for the RGB matrix with Feather RP2040. Prototyping a mysterious lemon themed project with the QT Py RP204. A mul...

3D Hangouts – Pixel Displays and VHS Pi Case

14 Apr 2021

Contributed by Lukas

This week we're checking out RGB matrix pixel displays with Feather RP2040. Chatting about a VHS themed case for Raspberry Pi 4. Two lovely print in p...

3D Hangouts – Terrako and Pixel Displays

07 Apr 2021

Contributed by Lukas

This week we're welcoming Terrako, an animatronic puppet from Zelda. Prototyping a pixel display with a 32x32 RGB matrix and Feather RP2040. Quick loo...

3D Hangouts – Pi 400 Cyberdecks, Terrako and Dragon Eggs

31 Mar 2021

Contributed by Lukas

This week we're checking out the CYBERDECK for the Pi 400 featuring the AMG8833 thermal camera and PiTFT. Prototyping Terrako, an animatronic puppet f...

3D Hangouts – Feather, Pi 400 Cyberdeck, and Sandworms

24 Mar 2021

Contributed by Lukas

This week we're making demos with the Feather RP2040. Prototyping a portable Raspberry Pi 400 with Cyberdeck HAT to make a thermal camera. 3D printing...

3D Hangouts – Feather RP2040, Guardian Robot and Github Skyline

17 Mar 2021

Contributed by Lukas

This week we're taking a look at the Feather RP2040. Work in progress this week featuring Guardian egg robot from Zelda Age of Calamity and a 16x16 Ne...

3D Hangouts – MIDI Controller, Guardian Robot and Mechanical Iris

10 Mar 2021

Contributed by Lukas

This week we're taking a deep dive into the guide for the Raspberry Pi Pico MIDI Fighter. Work in this progress this week featuring guardian egg robot...

3D Hangouts – MIDI Pico, Engraving and MicroStacks

03 Mar 2021

Contributed by Lukas

This week, everybody was MIDI fighting! Discussing features of the forthcoming MIDI project with the Raspberry Pi Pico. A look at engraving patterns f...

3D Hangouts – Animatronic Cosplay Wings

24 Feb 2021

Contributed by Lukas

This week we’re doing a deep dive on the animatronic cosplay wings. We’ll take a look at the servo mechanism and discuss custom mounts for a set o...

3D Hangouts – C02 Levels, Handles and Doorknobs #adafruit

17 Feb 2021

Contributed by Lukas

This week we’re taking a look at making a C02 monitor using LED Matrix display and Matrix Portal. A close look at the 3d printed handle with print i...

3D Hangouts – Pico, Lego, and MIDI

10 Feb 2021

Contributed by Lukas

This week we’re taking a look at cases and lego mounts for the Raspberry Pi Pico. A close look at 3d printed multicolored diffusers for NeoPixel. Pr...

3D Hangouts – QTPy Heart, Picos and Wings

03 Feb 2021

Contributed by Lukas

This week we’re taking a look at CNC milling a heart PCB for QTPy and NeoPixels. We have a portable neopixel case with the Raspberry Pico. New code ...

3D Hangouts - LoFi Pi Radio, Picos and Wings

27 Jan 2021

Contributed by Lukas

This week we’re taking a look at the LoFio Raspberry Pi youtube player with the BrainCRAFT hat. We’ll take a look at the animatronic servo control...

3D Hangouts – Darksabers, Dice Rollers and Buddha Boxes

20 Jan 2021

Contributed by Lukas

This week we unleash the Darksaber to the world! We'll walkthrough the learn guide and discuss the assembly while taking questions from the chats. Liv...

3D Hangouts – Feathers, Darksaber, LoFi Pi and Cable Spool

13 Jan 2021

Contributed by Lukas

This week we'll take a look at the PropMaker FeatherWing, Feathers and the code for the Darksaber. Prototyping an updated LoFi Pi radio YouTube stream...

3D Hangouts – Darksaber, Buddha Box and Screws

06 Jan 2021

Contributed by Lukas

The first 3D hangouts of 2021! Welcome back folks. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------...

3D Hangouts – IOT LED Sign, Darksaber and Ornaments

16 Dec 2020

Contributed by Lukas

This is the last show of 2020! This week we're taking a close look at the IoT NeoPixel LED sign. We'll walkthrough the learn guide and discuss the bui...

3D Hangouts – MagTag, Trees and Darksaber

09 Dec 2020

Contributed by Lukas

This week we're back from a 2-week hiatus! Live demos this week include the MagTag Christmas countdown, Circuit Playground hockey puck and a first loo...

3D Hangouts – MagTags, Fireplaces and Candles

18 Nov 2020

Contributed by Lukas

This week we take a moment to celebrate our 300th learn guide – what a milestone! Demoes include a first look at our 3d printed case and stand for t...

3D Hangouts – Air Quality, BrainCraft and iPhone12 Cases

11 Nov 2020

Contributed by Lukas

We are back this week! Thanks to everyone for voting. This week we’ll talk about the IOT air quality project as well as this weeks project, a 3D pri...