Fusion 360 Tutorial – Layer by Layer – Sweeping Snap Fits

In this tutorial we'll take a look at using the sweep feature to create snap fit enclosures. I walk through sketching out snap fit geometry and trouble shoot some oddities with using chain selections in a path. The kitty paw enclosure required some clearance to accommodate for the QT Py RP2040 micro-controller so each side has specific snap fits. Layer by Layer – Symmetrical Splines in Fusion 360 https://youtu.be/_jblwhxdDAM Learn Guide https://learn.adafruit.com/kitty-toe-bean-paw-keypad-color-tct Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Milling Monday https://www.youtube.com/playlist?list=PLjF7R1fz_OOVL48weqeHiu7aw-_sPhCSA Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

There are no comments yet.

Please log in to write the first comment.