NeoPixel Menorah

Build a 3D printed Menorah that lights up with NeoPixel LEDs and CircuitPython. A push button allows you to light up a NeoPixel LED on each night of Hanukkah. Learn Guide: https://learn.adafruit.com/neopixel-menorah/ This minimalistic design features parts that snap fit together and print without any supports. The assembly is modular and easy to put together. The bulbs are 3d printed in translucent PLA and the NeoPixels are fitted inside the candle holders. Code on GitHub https://github.com/adafruit/Adafruit_Learning_System_Guides/blob/main/NeoPixel_Menorah/code.py Parts QT Py RP2040 https://www.adafruit.com/product/4900 NeoPixel Button PCB https://www.adafruit.com/product/4356 16mm Push Button https://www.adafruit.com/product/1503 3-pin Cables https://www.adafruit.com/product/4721 2-pin Cables https://www.adafruit.com/product/4720 M2.5 Hardware Kit https://www.adafruit.com/product/3299 USB-C Cable https://www.adafruit.com/product/4696 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

There are no comments yet.

Please log in to write the first comment.