USB Media Dial

This is a USB HID device that is set up to play media and adjust the volume of your speakers. Underneath the knob is a NeoPixel strip that changes color whenever it’s turned up or down. You can single-click to play and pause media, double-click to skip to the next track. If you long press, it’ll mute the speaker's volume. The electronics are housed in our 3D printed snap fit enclosure that features a new design. The knob features a built-in LED diffuser with textured knurling on the outer edge. We used the filament swap technique to make a multi-material print so there’s no need for a multi-extruder. Just use white PLA filament to diffuse the LEDs. Code, libraries and assembly instructions are documented in the project Learn Guide links below. Learn Guide https://learn.adafruit.com/usb-rotary-media-dial/ QT Py RP2040 https://www.adafruit.com/product/4900 STEMMA QT Rotary Encoder https://www.adafruit.com/product/5880 NeoPixel Side Light Strip 120/m https://www.adafruit.com/product/3634 STEMMA QT Cable https://www.adafruit.com/product/4399 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

There are no comments yet.

Please log in to write the first comment.