Additive Insight

#137 AddUp North America CEO Rush LaSelle: 'The discipline is to focus on where we deliver value.'

17 Jul 2023

Contributed by Lukas

On the latest Additive Insight podcast, we're joined by Rush Laselle, the CEO of AddUp’s North America operations. AddUp was born from a joint ven...

#136 Callie Higgins & Stephanie Benight on the ongoing innovation in photopolymer 3D printing

10 Jul 2023

Contributed by Lukas

In our latest instalment of the Innovators on Innovators series, Callie Higgins, a materials research engineer at the National Institute of Standards ...

#135 Shri Shetty on Zeda's ambition to democratise access to high-quality 3D printed medical devices

03 Jul 2023

Contributed by Lukas

On the latest Additive Insight podcast, we're joined by Zeda CEO Shri Shetty. Zeda is the resulting brand from PrinterPrezz's acquisition of Vertex ...

#134 Neil Hopkinson: 'We're prioritising consistency over speed. And for perfectly good reasons.'

26 Jun 2023

Contributed by Lukas

On the latest Additive Insight episode, TCT Group Content Manager Sam Davies sits down with Neil Hopkinson. Hopkinson is the lead inventor of the Hi...

#133 Renishaw's metal additive manufacturing story so far

19 Jun 2023

Contributed by Lukas

Laura Griffiths meets with Louise Callanan, Director of Additive Manufacturing at Renishaw to discuss the engineering firm’s AM journey so far. Spe...

#132 TCT 3Sixty 2023: UK 3D printing launches, applications and more

12 Jun 2023

Contributed by Lukas

On this episode of the Additive Insight podcast, the TCT content team catch up after a busy week at the NEC Birmingham for the UK's flagship 3D prin...

#131 Pat Warner & Andy Allshorn deep dive into their early 3D printing applications

05 Jun 2023

Contributed by Lukas

This episode of the Additive Insight podcast features an Innovators on Innovators conversation between Andy Allshorn, the founder and Technical Direct...

#130 Richard Hague on multi-material, multifunctional additive manufacturing

22 May 2023

Contributed by Lukas

The job of a researcher is to keep reinventing and continue to ask “what’s next?” For Richard Hague, Professor of Additive Manufacturing and Dir...

#129 How Evove is using 3D printing to advance industrial membrane technologies

15 May 2023

Contributed by Lukas

On the latest Additive Insight podcast, TCT Group Content Manager Sam Davies takes the short trip to Evove, a UK-based company leveraging 3D printing ...

#128 Additive Insight: Launches, applications & more from RAPID + TCT

09 May 2023

Contributed by Lukas

As the 2023 RAPID + TCT event drew to a close, the TCT Magazine editorial team found a not entirely quiet corner to discuss what they had seen and hea...

#127 Impossible Objects details the capabilities of its new CBAM 25 composite 3D printer

01 May 2023

Contributed by Lukas

On this week's Additive Insight episode we're joined by Impossible Objects Chairman Bob Swartz and CEO Steve Hoover. The pair join us on the Additiv...

#100 Additive Insight | Print the Legend: A decade on

24 Apr 2023

Contributed by Lukas

In November 2014, TCT introduced the additive manufacturing industry’s first podcast, launching with an episode that featured the makers of Netflix’...

COMING SOON on the Additive Insight podcast

19 Apr 2023

Contributed by Lukas

Coming soon on the Additive Insight podcast: Episode #100. Print the Legend: A decade on - featuring new and exclusive interviews with Bre Pettis and...

#126 HILOS Chief Creative Gaia Giladi on delivering sustainable footwear with 3D printing

10 Apr 2023

Contributed by Lukas

Our latest guest on the Additive Insight podcast is Gaia Giladi, co-founder and Chief Creative of sustainable footwear brand HILOS. HILOS has come t...

#125 Innovators on Innovators: Duann Scott & Matt Shomper talk computational design best practices

03 Apr 2023

Contributed by Lukas

On the latest instalment of our Innovators on Innovators series, Tangible Solutions Director of Engineering Matt Shomper is joined by DfAM consultant ...

#124 3D printing insights from the AMUG Conference 2023

30 Mar 2023

Contributed by Lukas

On this week's Additive Insight podcast, TCT editors Laura Griffiths and Sam Davies find a rare quiet moment during the Additive Manufacturing Users ...

#123 Additive Insight: In conversation with AMUG Conference 2023 attendees

21 Mar 2023

Contributed by Lukas

On this week's Additive Insight podcast, TCT's Senior Content Producer Sam Davies is joined by Pat Warner, Kristin Mulherin & Matthew Shomper to discu...

#122 Bauer Hockey's Mat Dejardins on developing the REAKT helmet with 3D printing

13 Mar 2023

Contributed by Lukas

On the latest episode of the Additive Insight podcast, we're joined by Bauer Hockey Senior Brand Manager Mat Dejardins to discuss the company's use of...

#121 Meet the additive manufacturing innovators (Women in 3D Printing @ TIPE panel session)

08 Mar 2023

Contributed by Lukas

On this bonus Additive Insight podcast episode to celebrate International Women's Day, the five nominees for this year's TCT Women in 3D Printing Inno...

restor3d CTO Cambre Kelly on achieving scaled personalisation of medical devices with 3D printing

06 Mar 2023

Contributed by Lukas

On the latest episode of the Additive Insight podcast, Senior Content Producer Sam Davies sits down with restor3d co-founder and Chief Technology Offi...

#119 AMUG President Mark Abshire on what makes the user group 'a jewel of the 3D printing community'

27 Feb 2023

Contributed by Lukas

On this week's episode of Additive Insight, Mark Abshire, Additive Manufacturing Users Group President joins us ahead of this year's AMUG Conference. ...

#118 Inovators on Innovators: Amy Elliott & Melanie Lang on emerging metal 3D printing processes

21 Feb 2023

Contributed by Lukas

On the latest TCT Innovators on Innovators episode, Amy Elliot, a scientist at Oak Ridge National Laboratory, sits down with Formalloy CEO Melanie Lan...

#117 Frank Herzog on founding Concept Laser, selling to GE & investing back into AM

06 Feb 2023

Contributed by Lukas

On this episode of the Additive Insight podcast, we're joined by Frank Herzog, the co-founder of Concept Laser and Managing Director of the HZG Group....

Ziad Abou & Fried Vancraen on CO-AM, data security & skills in 3D printing

30 Jan 2023

Contributed by Lukas

On this episode of Innovators on Innovators, Materialise CEO Fried Vancraen sits down with Quickparts CEO Ziad Abou, just days after the companies ann...

#115 Chris Connery on the state of the 3D printing market

23 Jan 2023

Contributed by Lukas

On this week's episode of Additive Insight, Chris Connery, Head of Global Analysis at CONTEXT joins us to discuss the current state of 3D printer sh...

#114 Additive Insight: Terry Wohlers on his 35-year career in 3D printing

16 Jan 2023

Contributed by Lukas

On this week's episode of Additive Insight, we're joined by additive manufacturing industry consultant and analyst Terry Wohlers.  Wohlers, the fou...

#113 Matt Whelan & Brad Rothenberg on 3D printing's role in the future of design

09 Jan 2023

Contributed by Lukas

On the latest Innovators on Innovators episode of the Additive Insight podcast, Matt Whelan, Ocado Technology Head of Engineering for the 600 Series ...

#112 The biggest 3D printing stories of 2022

19 Dec 2022

Contributed by Lukas

For the last Additive Insight of 2022, the TCT editorial team gather for a first live recording from our newly minted TCT Additive Manufacturing Netwo...

#111 ALTANA on the divestiture of dp polar & materials development for 3D printing

12 Dec 2022

Contributed by Lukas

On this week's episode of Additive Insight, we're joined by ALTANA CTO Petra Severit & Dr. Max Röttger, Head of 3D Lab & Cubic Ink Additive Manufact...

#110 Hubs CEO Alex Cappy on decentralised manufacturing, quality assurance & more

05 Dec 2022

Contributed by Lukas

Hubs is an online manufacturing platform that was founded in 2013 and boasts a range of services that span 3D printing, CNC machining, injection mould...

#109 MakerVerse CEO on building 'the Amazon for 3D printing'

28 Nov 2022

Contributed by Lukas

On this week's episode of Additive Insight, MakerVerse CEO & Managing Director Markus Seibold joins as our latest Executive Interview guest. Laura Gr...

#108 The biggest 3D printing stories from Formnext

21 Nov 2022

Contributed by Lukas

On the latest Additive Insight, the TCT editorial team sum up a week in Frankfurt with a special roundtable recorded live at Formnext 2022.  The te...

#107 Innovators on innovators: Carl Dekker & Dallas Martin discuss AM inside Toyota's TILT Lab

14 Nov 2022

Contributed by Lukas

On the latest Additive Insight Innovators on Innovators podcast, Met-L-Flo President and AMUG Past President Carl Dekker sits down with William Dallas...

#106 Formlabs' Guillaume Bailliard on how 3D printing is only scratching the surface in medical

24 Oct 2022

Contributed by Lukas

In our latest Executive Interview, we speak to the newly appointed President of Healthcare at Formlabs Guillaume Bailliard. Bailliard has been worki...

#105 Innovators on Innovators: Joe Allison & Mike Littrell on launching new AM technologies

17 Oct 2022

Contributed by Lukas

On this episode of the TCT Additive Insight podcast, Evolve Additive CEO Joe Allison is joined by Buildparts founder Mike Littrell for the latest inst...

#104 Nikon makes major AM investments & UltiMaker merger closes

03 Oct 2022

Contributed by Lukas

On this week's episode of Additive Insight, the editorial team discuss the biggest additive manufacturing and 3D printing news stories from the last m...

#103 The future of sustainability in additive manufacturing

26 Sep 2022

Contributed by Lukas

On this week's episode of Additive Insight, we bring you a panel session recorded live at this year's TCT 3Sixty on the future of sustainability in ad...

#102 Live from IMTS: The biggest 3D printing launches

19 Sep 2022

Contributed by Lukas

TCT's Senior Content Producer Sam Davies joins Head of Content Laura Griffiths on a call from Chicago to discuss the biggest additive manufacturing la...

#101 Formalloy CEO Melanie Lang on new alloys & functionally integrated components with DED

12 Sep 2022

Contributed by Lukas

Melanie Lang founded FormAlloy in 2016, alongside CTO Jeff Riemann, after first becoming interested in 3D printing as a hobbyist. The co-founders fi...

#99 Scott Van Vliet on the use of 3D printing at Relativity Space

05 Sep 2022

Contributed by Lukas

On the latest Additive Insight podcast episode, we sit down with Scott Van Vliet, the SVP of Additive & Software Engineering at Relativity Space, to ...

#98 Stratasys acquires Covestro, plus 3D printing news from Aston Martin

29 Aug 2022

Contributed by Lukas

For this week's episode of Additive Insight, the TCT editorial team is back with another Editorial Roundtable, covering the biggest 3D printing and ad...

#97 Tali Rosman & Mike Pecota talk 3D printing in the military

15 Aug 2022

Contributed by Lukas

Earlier this year, Xerox announced the installation of an ElemX liquid metal 3D printing system on a U.S. naval vessel. It followed the deployment of ...

#96 AMGTA's Sherri Monroe on the AM industry's commitment to sustainability

08 Aug 2022

Contributed by Lukas

On this week’s episode of Additive Insight, Sherri Monroe, Executive Director at the Additive Manufacturer Green Trade Association (AMGTA) joins us ...

#95 Nano Dimension acquires stake in Stratasys + Formlabs launches enhanced SLS 3D printer

01 Aug 2022

Contributed by Lukas

On this week's Additive Insight podcast, the TCT editorial team is back for another editorial roundtable covering the biggest 3D printing and additiv...

#94 Seurat CEO James DeMuth on targeting mass production with metal 3D printing

25 Jul 2022

Contributed by Lukas

James DeMuth, the CEO of Seurat Technologies, joins the Additive Insight podcast to explain how his company is looking to achieve mass production with...

#93 Eliana Fu & Paul Gradl on the use of 3D printing in space exploration

18 Jul 2022

Contributed by Lukas

Trumpf Industry Manager for Aerospace & Medical Eliana Fu sits down with NASA's Paul Gradl to discuss NASA's application of 3D printing, the importanc...

#92 Women in 3D Printing fireside chat @ TCT 3Sixty

11 Jul 2022

Contributed by Lukas

On this episode of Additive Insight, TCT Head of Content Laura Griffiths speaks to Eliana Fu and Kristin Mulherin in this Women in 3D Printing firesi...

Additive Insight - The podcast for 3D printing & additive manufacturing intelligence

04 Jul 2022

Contributed by Lukas

Additive Insight is your source for news, interviews and comment on the latest 3D printing and additive manufacturing intelligence, brought to you by ...

#91 TCT 3Sixty: 3D printing highlights, Awards & Hall of Famers

10 Jun 2022

Contributed by Lukas

On this episode of Additive Insight, the TCT editorial team record live from the TCT 3Sixty show floor to bring you highlights from the UK's leading 3...

#90 THEFUTUREOFJEWELRY on 'marrying the old and new' with 3D printing

03 Jun 2022

Contributed by Lukas

On this week’s episode of Additive Insight, Casey Melvin, Co-founder and Co-CEO of THEFUTUREOFJEWELRY joins us as our Executive Interview guest.  ...

#89 Additive manufacturing insights live from RAPID + TCT

23 May 2022

Contributed by Lukas

On this episode of Additive Insight, the TCT content team discuss the latest 3D printing and additive manufacturing developments live from RAPID + T...

#88 Makelab CEO Christina Perla on building 'the Kinko's of additive manufacturing'

21 Apr 2022

Contributed by Lukas

On this episode of Additive Insight, our Executive Interview series continues with Makelab Co-founder and CEO Christina Perla.  Perla founded Makel...

#87 John Bohenick & Steve Zambrano on the design of 3D printed medical devices

11 Apr 2022

Contributed by Lukas

On the latest episode of the Additive Insight podcast, we bring you another Innovators on Innovators instalment which features Osseus Fusion Systems R...

#86 Zortrax halts investment negotiations + XJet ships first metal AM machine

03 Apr 2022

Contributed by Lukas

This week's Additive Insight is another Editorial Roundtable featuring the biggest 3D printing and additive manufacturing news stories from the last m...

#85 Prof. Phill Dickens & Stefanie Brickwede discuss the suitability of AM for spare parts

14 Mar 2022

Contributed by Lukas

On this episode of the Additive Insight podcast, we bring you the latest instalment of our Innovators on Innovators series, featuring Professor Ph...

#84 3D printing M&As update + last chance to enter TCT Awards

28 Feb 2022

Contributed by Lukas

On this week's episode of Additive Insight, TCT Editors Laura Griffiths and Sam Davies discuss the biggest 3D printing and additive manufacturing news...

#83 Stephanie DePalma & Eric Utley on the 3D printing of Zac Posen's Met Gala gowns

21 Feb 2022

Contributed by Lukas

On this episode of the Additive Insight podcast, we bring you the latest instalment of our Innovators on Innovators series, featuring GE Additive ...

#82 TCT Women in 3D Printing Innovator Award - Meet the finalists

14 Feb 2022

Contributed by Lukas

At this year's TIPE 3D Printing Conference, the finalists for the 2022 TCT Women in 3D Printing Innovator Award were unveiled.  The collaboration be...

#81 Alex Kingsbury and Candice Majewski on polymers, metals & standards in 3D printing

24 Jan 2022

Contributed by Lukas

On this episode of the Additive Insight podcast, we bring you the fifth instalment of our Innovators on Innovators series, featuring Candice Majewski ...

#80 2021's biggest 3D printing news stories (Part 2)

27 Dec 2021

Contributed by Lukas

In part two of our final Additive Insight editorial roundtable of the year, Head of Content Laura Griffiths and Senior Content Producer Sam Davies gat...

#79 2021's biggest 3D printing news stories (Part 1)

20 Dec 2021

Contributed by Lukas

For our final Additive Insight editorial roundtable of the year, Head of Content Laura Griffiths and Senior Content Producer Sam Davies reflect on t...

#78 Innovators on Innovators: Scott Sevcik & Michael Hayes talk 3D printing in aerospace

10 Dec 2021

Contributed by Lukas

On this episode of Additive Insight, we bring you the fourth instalment of our Innovators on Innovators series featuring Stratasys' VP of Aerospace S...

#77 The biggest 3D printing announcements from Formnext

05 Dec 2021

Contributed by Lukas

On this episode of Additive Insight, TCT editors Laura Griffiths and Sam Davies gather around the mic for another Editorial Roundtable. This month, ...

#76 Innovators on Innovators: Ben Johnson & Laura Gilmour on 3D printing at the point of care

12 Nov 2021

Contributed by Lukas

3D Systems' VP, Portfolio and Regulatory, Healthcare Ben Johnson sits down with Laura Gilmour, a Principal Consultant for AM and Regulatory Strategies...

#75 Women in 3D Printing @ TCT 3Sixty - AM & sustainability panel

05 Nov 2021

Contributed by Lukas

This year's TCT 3Sixty saw TCT teaming up with Women in 3D Printing once again to host its fourth panel session at the flagship UK additive manufa...

#74 Lithoz CEO on a decade of 3D printing ceramics

25 Oct 2021

Contributed by Lukas

On this week's Additive Insight podcast, Lithoz CEO Dr Johannes Homa joins us as our latest Executive Interview guest to reflect on a decade in the a...

#73 Innovators on Innovators: Dr Phil Reeves and Andy Langfeld on AM, sustainability + more

09 Oct 2021

Contributed by Lukas

On this episode of Additive Insight, we bring you the second instalment of our Innovators on Innovators series featuring industry consultant and Reeve...

#72 Reflecting on TCT 3Sixty

03 Oct 2021

Contributed by Lukas

On this special episode of Additive Insight, TCT's Head of Content Laura Griffiths and Senior Content Producer Sam Davies reflect on their first trad...

#71 6K Additive President on making metal AM more sustainable

24 Sep 2021

Contributed by Lukas

On this episode of Additive Insight, our Executive Interview series with an interview with Frank Roberts, Group President at 6K Additive. 6K Additiv...

#70 3D printing for production? "We're there already" says Ultimaker CTO

06 Sep 2021

Contributed by Lukas

On this week’s Additive Insight podcast, Ultimaker Chief Technology Officer, Miguel Calvo joins us as our latest Executive Interview guest. Miguel ...

#69 Desktop Metal to acquire ExOne & Xerox backs CASTOR

27 Aug 2021

Contributed by Lukas

For the August edition of our Additive Insight Editorial Roundtable, TCT's Head of Content Laura Griffiths and Senior Content Producer Sam Davies disc...

#68 SLM Solutions CEO discusses Free Float 3D printing

13 Aug 2021

Contributed by Lukas

On this episode of the Additive Insight podcast, TCT Head of Content Laura Griffiths is joined by Sam O’Leary, CEO at metal additive manufacturing c...

#67 DyeMansion CEO on turning 3D printed parts into high-value products

06 Aug 2021

Contributed by Lukas

On this episode of the Additive Insight podcast, we're continuing our Executive Interview series, this time with Co-founder and CEO of DyeMansion, Fel...

#66 Desktop Metal acquires Aerosint & Fast Radius goes public

30 Jul 2021

Contributed by Lukas

For July's Additive Insight Editorial Roundtable, TCT's Head of Content Laura Griffiths and Senior Content Producer Sam Davies discuss the biggest 3D ...

#65 Digital Manufacturing Centre founder on 3D printing & UK innovation

26 Jul 2021

Contributed by Lukas

On today’s episode we have a conversation with Kieron Salter, founder of the UK’s Digital Manufacturing Centre, which officially opens its doors a...

#64 SLM Solutions introduces Free Float + Markforged teases new 3D printer

02 Jul 2021

Contributed by Lukas

On this Additive Insight Editorial Roundtable, TCT's Head of Content Laura Griffiths and Senior Content Producer Sam Davies discuss the biggest 3D pr...

#63 Adidas' latest application of Carbon 3D printing + Daimler, Forust & Wayland Additive

28 May 2021

Contributed by Lukas

On this month's Additive Insight Editorial Roundtable, TCT's Head of Content Laura Griffiths and Senior Content Producer Sam Davies discuss May's bigg...

#62 Innovators on Innovators: EOS founder Hans Langer & Hyperganic CEO Lin Kayser

07 May 2021

Contributed by Lukas

For the first episode of our new Additive Insight "Innovators on Innovators" series, we have a conversation with Hans Langer, founder of industrial 3D...

#61 Stratasys & Fortify machine launches + the latest AM M&A

30 Apr 2021

Contributed by Lukas

For the April edition of TCT's Additive Insight editorial roundtable, TCT Head of Content Laura Griffiths and Senior Content Producer Sam Davies disc...

#60 MakerBot CEO talks metal 3D printing on the desktop, accessibility + more

16 Apr 2021

Contributed by Lukas

For this week's episode of Additive Insight, MakerBot CEO Nadav Goshen joins TCT Head of Content Laura Griffiths as our latest Executive Interview gu...

#59 Industry Roundtable - 3D Printing & Supply Chain

09 Apr 2021

Contributed by Lukas

After a year which saw countless examples of 3D printing used to plug supply chain gaps and manufacture emergency components amid disruptions from the...

#58 VELO3D goes public + Stratasys enters powder bed fusion market

26 Mar 2021

Contributed by Lukas

On this month's Additive Insight editorial roundtable, TCT Head of Content Laura Griffiths and Senior Content Producer Sam Davies discuss March's ...

#57 Desktop Metal CTO on Additive Manufacturing 2.0

19 Mar 2021

Contributed by Lukas

On this episode of the Additive Insight podcast, Laura Griffiths, TCT Head of Content is joined by Jonah Myerberg, Co-founder and CTO at Desktop Me...

#56 An interview with Women in 3D Printing founder Nora Toure

08 Mar 2021

Contributed by Lukas

For our latest Executive Interview, Nora Toure, Director for Sales and Service Factory Operations at Fast Radius and founder of Women in 3D Printing ...

#55 Stratasys acquires RPS + office-friendly metal 3D printing developments

26 Feb 2021

Contributed by Lukas

On this month's Additive Insight editorial roundtable, TCT Head of Content Laura Griffiths and Senior Content Producer Sam Davies discuss February's b...

#54 Xerox's Tali Rosman on 3D printing, workflows and supply chain

19 Feb 2021

Contributed by Lukas

On this episode of Additive Insight, TCT Head of Content Laura Griffiths is joined by Tali Rosman, Xerox Vice President and General Manager for 3D Pri...

#53 AM-Flow talks demand for additive manufacturing workflow automation

05 Feb 2021

Contributed by Lukas

On this week's episode of Additive Insight, our Executive Interview series continues with a conversation with Carlos Zwikker, Chief Commercial Officer...

#52 Desktop Metal buys EnvisionTEC + more 3D printing acquisitions

22 Jan 2021

Contributed by Lukas

In the first of our new monthly editorial roundtable sessions, TCT editors Laura Griffiths and Sam Davies discuss some of the biggest and most-read 3D...

#50 Looking back at the biggest 3D printing developments of 2020

25 Dec 2020

Contributed by Lukas

For 2020’s last episode of Additive Insight (and our 50th episode to date), TCT editors Laura Griffiths and Sam Davies gather around the virtual mic...

#49 SPEE3D CEO talks lightning fast metal 3D printing

16 Dec 2020

Contributed by Lukas

On this week's episode of Additive Insight, TCT Head of Content Laura Griffiths speaks to Byron Kennedy, CEO of Australian additive manufacturing comp...

#48 Dr Lee-Bath Nelson on AM, IP and distributed manufacturing

02 Dec 2020

Contributed by Lukas

On this week's episode of Additive Insight, TCT speaks to Dr Lee-Bath Nelson, Co-founder and VP Business at additive manufacturing software as a servi...

#47 3D printing highlights from Formnext Connect

13 Nov 2020

Contributed by Lukas

On this weeks episode of Additive Insight, the TCT content team reflect on a busy week at Formnext Connect including the biggest launches from the vir...

#46 Dan's 3D printing highlights

30 Oct 2020

Contributed by Lukas

On this week’s episode of Additive Insight, The TCT Group’s outgoing Head of Content Daniel O’Connor gets his turn in the hot seat as the editor...

#45 Xometry CEO on the power of distributed manufacturing

23 Oct 2020

Contributed by Lukas

On this week's episode of Additive Insight, we're joined by Randy Altschuler, CEO of on-demand manufacturing marketplace, Xometry. Earlier this year,...

#44 nTopology CEO on empowering engineers to make transformative products

09 Oct 2020

Contributed by Lukas

This week, nTopology CEO Bradley Rothenberg joins us on the Additive Insight podcast. Last year the New York-based software company brought its TCT A...

#43 CEO Steve Chillscyzn on Evolve Additive’s next STEP

02 Oct 2020

Contributed by Lukas

On this episode of the Additive Insight podcast, Steve Chillscyzn, CEO of Evolve Additive and inventor of STEP (Selective Thermoplastic Electrophotogr...

#42 BCN3D CEO on new era and next-gen 3D printers

25 Sep 2020

Contributed by Lukas

On this this episode of Additive Insight, TCT Deputy Group Editor Laura Griffiths speaks to Xavier Martínez Faneca, CEO of Barcelona-based 3D printin...

#41 Formlabs CEO on becoming a leader in 3D printing

18 Sep 2020

Contributed by Lukas

On this week's episode of Additive Insight, TCT Deputy Group Editor Laura Griffiths is joined by Max Lobovsky, Co-founder and CEO of leading 3D printi...

#40 AMGTA's Sherry Handel on green additive manufacturing

21 Aug 2020

Contributed by Lukas

On the latest episode of our Additive Insight podcast, Deputy Group Editor Laura Griffiths speaks to Sherry Handel, Executive Director at the Additive...

#39 Carbon CEO Ellen Kullman on the opportunity in additive manufacturing

07 Aug 2020

Contributed by Lukas

In the latest episode of our Additive Insight Executive Interview series, Deputy Group Editor Laura Griffiths speaks to Ellen Kullman, CEO of Carbon. ...