Beyond Clean Podcast

The Last Black Speck: How One Team Solved the Debris Problem for Good

06 May 2026

Contributed by Lukas

What does it really take to make sure a black speck problem never comes back? In the final episode of "What the Speck?," Sterile Processing expert Ken...

On Pathogens & PPE: Taking the Lead in SPD

05 May 2026

Contributed by Lukas

You're doing the work. You're solving the problems. Now it's time to take the lead! On this Season 2 finale of "On Pathogens & PPE," host Jill Holdsw...

SPD Fact Check - Now You See Me: When Borescopes Reveal Dirty Instruments

04 May 2026

Contributed by Lukas

You run a borescope through an instrument, and something doesn't look right. Is it debris? Damage? Or has it always been there? On this episode of Bey...

A Speck in Your Eye: Putting an End to the Finger-Pointing

29 Apr 2026

Contributed by Lukas

Black specks may be small, but the tension they create between departments can be anything but. In this episode of "What the Speck?," Alex Miseirvitc...

On Pathogens & PPE: Assembly Without Disruptions

28 Apr 2026

Contributed by Lukas

You're building a tray. The phone rings. Someone needs an update. You step away… and just like that, the process breaks. On this week's episode of "...

SPD Fact Check - The $4,999 Problem: What Invoice Splitting Really Costs SPD Leaders

27 Apr 2026

Contributed by Lukas

$4,999. In many SPDs, that number can be the difference between getting what your department needs—or waiting months for approval. On this episode ...

Problems in the Pipes: Is Water Causing Your Black Specks?

22 Apr 2026

Contributed by Lukas

When black specks show up in your trays, water is often the first suspect—but is it really to blame? In this episode of "What the Speck?," Christian...

On Pathogens & PPE: Why Brush Selection Matters

21 Apr 2026

Contributed by Lukas

Think one brush fits all? Think again! On this week's episode of "On Pathogens & PPE," hosts Jill Holdsworth and Trevor Hazen are joined by Nelson Win...

SPD Fact Check - Just Roll with It? The Dirty Truth about Instrument Transport

20 Apr 2026

Contributed by Lukas

It might only be a few steps from the OR to decontam, so how do you ensure your instruments get there safely? This week on Season 32 "SPD Fact Check,"...

Clear the Air: Rethinking PPE Protection in SPD

17 Apr 2026

Contributed by Lukas

Is the PPE your team relies on actually built for the environment you work in? On this week's Beyond Clean Vendor Spotlight™, Ken Arthur and Desiree...

A Trail of Breadcrumbs: Getting to the Source of Your Black Speck Issue

15 Apr 2026

Contributed by Lukas

Behind every black speck is a process, a piece of equipment, or a hidden culprit waiting to be discovered. In this episode of "What the Speck?," SPD p...

On Pathogens & PPE: What's Hiding in Your Lumens

14 Apr 2026

Contributed by Lukas

You followed the IFU. You brushed. You flushed. So it's clean… right? On this week's episode of "On Pathogens & PPE," hosts Jill Holdsworth and Bran...

SPD Fact Check - Workin' at the Cart Wash: Exploring SPD's Biggest Washer

13 Apr 2026

Contributed by Lukas

Case carts in, case carts out—but do you really know what's happening inside your SPD's cart washer? On this episode of Beyond Clean, we're joined b...

From Speck to Source: What Exactly Is a "Black Speck?"

08 Apr 2026

Contributed by Lukas

When a black speck shows up in a surgical tray, the first question is simple: "What is it?" But as many Sterile Processing teams discover, the answer ...

On Pathogens & PPE: Getting Sterile Storage Right

07 Apr 2026

Contributed by Lukas

Peel pouches hanging from clips, dust collecting in bins, trays stacked just a little too high… sound familiar? When it comes to sterile storage, sm...

SPD Fact Check - The Robot Whisperer: Clearing Up Confusion in Robotic Instrument Reprocessing

06 Apr 2026

Contributed by Lukas

Robotic cases aren't slowing down—and neither are the demands on Sterile Processing. On this premiere episode of Beyond Clean's Season 32, "SPD Fact...

Black Specks, Big Consequences: Exploring the Challenges of Unidentified Debris

01 Apr 2026

Contributed by Lukas

Every #CleanFreak has seen them at least once—those mysterious black specks appearing in surgical trays with no clear explanation. But are they just...

On Pathogens & PPE: Decontam Under Pressure

31 Mar 2026

Contributed by Lukas

Stacks of vendor trays arriving without warning, stat turnaround instruments soaking in the sink, and techs scrolling through 100+ documents to find t...

On Pathogens & PPE: Endoscope Reprocessing Challenges

24 Mar 2026

Contributed by Lukas

Ask any #CleanFreak, and they'll tell you—endoscope reprocessing is one of the most complex processes in Sterile Processing. So how are you setting ...

A Total 360: The Story of a Complete Shift from 0 to 360 Trays

20 Mar 2026

Contributed by Lukas

Struggling with instrument shortages, case delays, and constant turnover pressure? What if one change could help you do more with what you already ha...

On Pathogens & PPE: Environmental Emergencies in SPD

17 Mar 2026

Contributed by Lukas

Temperature swings, humidity spikes, HVAC failures, and water emergencies — oh my! In this episode of "On Pathogens & PPE," host Jill Holdsworth and...

On Pathogens & PPE: Why Water Quality Matters

10 Mar 2026

Contributed by Lukas

Think water is just water? Not in Sterile Processing! In this episode of "On Pathogens & PPE," host Jill Holdsworth and co-host Aaron Preston are join...

On Pathogens & PPE: The Challenge of Robotic Instrument Reprocessing

03 Mar 2026

Contributed by Lukas

Robotic surgery is a game-changer for patient care — but what does that mean for the teams responsible for safely reprocessing these complex instrum...

Beyond Clean Canada: More Than Instruments: Supporting Canada's MDR Community

25 Feb 2026

Contributed by Lukas

Behind every sterilized instrument is a dedicated MDR professional. So, how do we support these professionals who make surgery possible every single d...

On Pathogens & PPE: Hand Hygiene in SPD

24 Feb 2026

Contributed by Lukas

Hey #CleanFreaks, pop quiz: When's the last time you washed your hands on the clean side, and should you have? On this episode of "On Pathogens & PPE,...

Under Pressure - Out of Steam: Responding to Sterilization Shutdowns

23 Feb 2026

Contributed by Lukas

Picture this: your steam goes down on a busy Tuesday morning. Cases are booked, patients are waiting, and your sterilizers won't run. What's your team...

Let's Be Clear(ed): A NEW 2nd FDA Clearance and a NEW President/CEO

20 Feb 2026

Contributed by Lukas

Big news from ONE TRAY®! On this Beyond Clean Vendor Spotlight™ episode, we're joined by Tim Tzimas, newly appointed President & CEO of ONE TRAY®/...

Beyond Clean Canada: Coast to Coast: Leading MDR Education Across Nova Scotia

18 Feb 2026

Contributed by Lukas

Building an MDR career is one thing. But leading education for an entire province? That's a whole different challenge. On this episode of Beyond Clean...

On Pathogens & PPE: Transporting Contaminated Instruments

17 Feb 2026

Contributed by Lukas

From the OR to SPD, those contaminated instruments are on the move, and so are pathogens! In this Season 2 premiere of "On Pathogens & PPE," host Jill...

Under Pressure - Teamwork Makes the Steam Work: The Crucial Partnership of SPD and Facility Engineering

16 Feb 2026

Contributed by Lukas

You depend on steam every single day to keep your SPD moving. So, when steam issues shut down your sterilizers, who you gonna call? On this episode of...

Beyond Clean Canada: Built to Last: Career Pathways & Professional Growth in MDR

11 Feb 2026

Contributed by Lukas

Technical skills might get you in the door, but what does it actually take to build a lasting career in medical device reprocessing? On this episode o...

Sterilization Standards Unpacked - What's Next for Dental Sterilization?

10 Feb 2026

Contributed by Lukas

Where are Canada's dental sterilization standards headed next? In this series finale of "Sterilization Standards Unpacked," we're joined by Leeanne Is...

Under Pressure - Pack it Up, Wet Packs

09 Feb 2026

Contributed by Lukas

Wet packs happen in every department. But how much do we really know about what causes them? This week on Beyond Clean, Jason Simon, Senior Product Ma...

Beyond Clean Canada: Educating Differently: Innovation and Purpose in MDR

04 Feb 2026

Contributed by Lukas

Ever wonder how personal experience shapes the way we approach education and patient safety in MDR? In this episode of Beyond Clean Canada, Stacey Gi...

Sterilization Standards Unpacked - From Paper to Practice: CSA Standards in Action

03 Feb 2026

Contributed by Lukas

Sterilization standards look a lot different on paper than they do in the middle of a busy clinic day. That gap between policy and practice is the foc...

Under Pressure - Full Steam Ahead: A Deep Dive into Steam Sterilizer Anatomy

02 Feb 2026

Contributed by Lukas

You load trays and hit start on your steam sterilizer dozens of times a day. But do you actually know what's happening inside that chamber once the do...

Under Pressure - Full Steam Ahead: A Deep Dive into Steam Sterilizer Anatomy

02 Feb 2026

Contributed by Lukas

You load trays and hit start on your steam sterilizer dozens of times a day. But do you actually know what's happening inside that chamber once the do...

Sterilization Standards Unpacked - Bioburden, Biofilm, & Beyond: The Science Driving Dental Standards

27 Jan 2026

Contributed by Lukas

What really happens at the microscopic level when we talk about "clean" in dental sterilization? In this episode of "Sterilization Standards Unpacked,...

Under Pressure - Heavy Metal: Why Weight Limits Matter in Steam Sterilization

26 Jan 2026

Contributed by Lukas

Weight limits exist for every sterilizer and every tray that goes into it. But what happens when those limits get overlooked in the daily rush? On thi...

Sterilization Standards Unpacked - Small Spaces, Big Standards: Dental Sterilization Across Canada

20 Jan 2026

Contributed by Lukas

Dental clinics may be small, but the expectations for safe, consistent sterilization are anything but. In this episode of "Sterilization Standards Unp...

Under Pressure - The Rust Stops Here: Keeping Stainless Steel Stainless

19 Jan 2026

Contributed by Lukas

Ever wonder why your "stainless" steel instruments keep staining and rusting? On this episode of Beyond Clean, we sit down with metallurgical engineer...

Scope of Innovation: Single-Use Solutions for Surgical Success

16 Jan 2026

Contributed by Lukas

Perfect imaging every time. No repairs. No reprocessing. Could single-use arthroscopes be the answer? On this special Beyond Clean, First Case, Power ...

Sterilization Standards Unpacked - Where Do We Begin? Making Sense of Canada's Dental Standards

13 Jan 2026

Contributed by Lukas

Feeling overwhelmed by Canada's newest dental sterilization standards? You're not alone. In this kickoff episode of our newest podcast series "Sterili...

Under Pressure - CI, Robot: Computer Vision for Sterility Assurance

12 Jan 2026

Contributed by Lukas

The dreaded missing indicator—you've trained on it, created systems for it, and yet trays still reach the OR without them. What if technology could ...

Under Pressure - IUSS Has Left the Building: How One SPD Made It to Zero

05 Jan 2026

Contributed by Lukas

What if your department could go from over 10% immediate use steam sterilization (IUSS) cycles to nearly zero? In the Season 31 premiere of Beyond Cle...

Sterile Horizons - Inspection Ready: Preparing Your ASC for Surveys

25 Nov 2025

Contributed by Lukas

Accreditation surveys don't start when the clipboard walks in—they start with your culture, your training, and your daily workflows. In this series ...

Tray Command - ASHRAE 43 & Sterile Processing: Managing Your Sterile Storage Environment

24 Nov 2025

Contributed by Lukas

The temp spikes. The humidity climbs. Your sterile storage alarms go off—now what? In this episode of Beyond Clean's Tray Command, we sit down with ...

Sterile Horizons - Sterility Assurance in ASCs: Tools & Techniques

18 Nov 2025

Contributed by Lukas

In the fast-paced world of ASCs, sterility assurance isn't just a priority—it's non-negotiable. But what does getting it right actually look like? I...

Tray Command - Cart Before the Scalpel: The Accuracy That Drives Surgery

17 Nov 2025

Contributed by Lukas

Every successful surgery starts with a perfectly assembled case cart. But what happens when the next cart rolling into the OR is missing a critical su...

At the Tip of Safety: Sustainable Solutions for Instrument Protection

14 Nov 2025

Contributed by Lukas

Better protection. Less waste. Could your instrument tip protectors really do both? On this special Beyond Clean and Power Supply Vendor Spotlight™...

Sterile Horizons - Running on Empty: The Inventory Crunch in ASCs

11 Nov 2025

Contributed by Lukas

When trays are turning fast and supplies are running low, it's not just the shelves that feel the strain—it's also your staff. In this episode of "S...

Tray Command - Break Glass in Case of Surgery: Managing Emergency Carts in SPD

10 Nov 2025

Contributed by Lukas

You're in the middle of a normal day, and suddenly an emergency case is called. Your team reaches for the emergency cart… and that's when it hits yo...

Sterile Horizons - Beyond the Hospital: Unique Sterilization Challenges in ASCs

04 Nov 2025

Contributed by Lukas

Think an ASC should operate like a mini hospital? Think again! In this episode of "Sterile Horizons," industry powerhouse Monique Jelks joins host Bob...

Tray Command - Recall Ready? Exploring the Logistics of Sterilization Failures

03 Nov 2025

Contributed by Lukas

It's 3rd shift on a Saturday, the BI fails—is your team prepared for what happens next? In this episode of Tray Command, we're joined by Sandra Hill...

Sterile Horizons - Lean ASC: Designing for Efficiency & Safety

28 Oct 2025

Contributed by Lukas

What does it really take to build an ASC Sterile Processing department that runs lean and safe? In this premiere episode of our new podcast series "St...

Tray Command - Freight Expectations: Lessons Learned from Off-Site Transport

27 Oct 2025

Contributed by Lukas

What does it really take to move surgical instruments safely and efficiently across town—and back—every single day? In this episode of Beyond Clea...

Tray Command - Yours, Mine, or Ours? The Complex Web of Loaner Logistics

20 Oct 2025

Contributed by Lukas

Every #CleanFreak knows the sound—the rattle of a cart rolling into decontam, stacked high with trays just before your shift ends. (You can hear it...

Tray Command - At Arm's Length: The Case for Keeping Sterile Instruments Close

13 Oct 2025

Contributed by Lukas

When seconds matter, where your instruments are stored can make all the difference. On this episode of Beyond Clean's "Tray Command," Bobby Parker and...

Tray Command - Thank You for Calling SPD: Long Live Customer Service

06 Oct 2025

Contributed by Lukas

What if the biggest game-changer for your Sterile Processing department wasn't a new piece of equipment—but a new approach to customer service? In t...

Non-Stop Compliance: Staying Ahead of Industry Standards with Best Practices and Assessments

29 Sep 2025

Contributed by Lukas

Compliance doesn't have to be complicated! In this Beyond Clean special release podcast episode, recorded LIVE at HSPA 2025, Jill Holdsworth, Richard...

Beyond Clean Canada: Bioburden & Beyond: Global Insights in Sterile Processing

24 Sep 2025

Contributed by Lukas

What do borders, bioburden, and best practices have in common? According to René Vis, they all impact how we #FightDirty around the world. In this ep...

Sustaining Sterile Processing Success: Building a Legacy of Crowning Achievements

22 Sep 2025

Contributed by Lukas

Successful Sterile Processing departments don't happen by accident—they're built through intentional leadership, strategic planning, and strong prof...

Beyond Clean Canada: The Pod That Changed the Process: Efficiency, Ergonomics & Innovation

17 Sep 2025

Contributed by Lukas

What if one device could change everything about how we process surgical instruments? In this episode of Beyond Clean Canada, we welcome Robert Turbet...

Up for Change: Renovations, Centralization, and New Department Solutions

14 Sep 2025

Contributed by Lukas

Is your SPD facing a major renovation? Join Jenny Bennett, Mark Munroe, and Bobby Parker in this Beyond Clean special podcast release episode, recorde...

Cut the Clutter: Rethinking Vendor Tray Efficiency with EZ-TRAX™

12 Sep 2025

Contributed by Lukas

Fewer trays. Better workflows. Could it really be that simple? On this Beyond Clean Vendor Spotlight™, Kyle Kemp, National Director of Business Deve...

Beyond Clean Canada: Breaking the Mold: Insights & Innovation from the Frontline

10 Sep 2025

Contributed by Lukas

Get ready to stir that pot, #CanadianCleanFreaks—because Jessie Lopez is joining the conversation to shake things up! On this episode of Beyond Cle...

ASC Answers! Scaling Reprocessing Excellence Amidst Complexity

08 Sep 2025

Contributed by Lukas

Calling all #CleanFreaks! Is your SPD keeping pace with your ASC's rising surgical volumes? In this Beyond Clean special podcast release episode, reco...

Beyond Clean Canada: From Burnout to Breakthrough: Passion, Purpose, & the Power of Podcasting

03 Sep 2025

Contributed by Lukas

What happens when burnout meets a breakthrough? In this episode of Beyond Clean Canada, we're joined by veteran Sterile Processing professional and h...

Beyond Clean Canada: Better by Design: Ergonomics, Innovation, & the Future of MDR

27 Aug 2025

Contributed by Lukas

What if your department's sinks were built with you—and your workflows—in mind? In this episode of Beyond Clean Canada, we're joined by Doug Brown...

Planet Assembly - Don't Fear the Repair: Empowering SPD Assembly to Act Early

25 Aug 2025

Contributed by Lukas

What does your repair bin say about your department's inspection process? This week, we sit down with Joseph Martin, Sterile Processing Manager at UCH...

StreetClothes: The Surfer

24 Aug 2025

Contributed by Lukas

On this episode of StreetClothes, we speak with a clinician with a passion for chasing waves and finding rhythm in the ocean's tide. From early-mornin...

Beyond Clean Canada - Confidence, Certification, & the Future of SPD

20 Aug 2025

Contributed by Lukas

What do confidence, certification, and career growth have in common? According to Sarah B. Cruz, just about everything! On this episode of Beyond Clea...

Planet Assembly - What You Can't See CAN Hurt You: Inside the Lumens 2.0 Study

18 Aug 2025

Contributed by Lukas

What happens when you take a closer look inside your lumened instruments? According to the Unseen Threats: Lumens 2.0 study, every instrument told the...

Beyond Clean Canada: Steam, Pipes, & Patient Safety: Water Quality Explained

13 Aug 2025

Contributed by Lukas

Water, water everywhere—but is it safe for sterilization? In this episode of Beyond Clean Canada, we're joined by water-quality expert Jeffrey Paque...

Planet Assembly - Tunes in the Trenches: Is Music An Essential Part of SPD Assembly?

11 Aug 2025

Contributed by Lukas

Earbuds, the radio, or silence on the floor—every SPD has its own beat. What's yours? On this episode of Beyond Clean's Planet Assembly, we're joine...

StreetClothes: The Hairdresser

10 Aug 2025

Contributed by Lukas

On this episode of StreetClothes, we speak with a healthcare professional whose passion for style and connection comes to life behind the salon chair....

Beyond Clean Canada: Sealing the Standard: Containers, Compliance & What Comes Next

06 Aug 2025

Contributed by Lukas

Welcome back, #CanadianCleanFreaks! We're kicking off Season 2 with a deep dive into rigid containers—and the standards that keep contamination out ...

Planet Assembly - Proof in the Process: How One SPD Cut Tray Errors with Audits

04 Aug 2025

Contributed by Lukas

Every SPD tech knows the feeling: the tray wasn't right, and now everything's running behind. But what if one small check could stop the chaos before ...

Planet Assembly - That's a Wrap! The Science & Practice of Surgical Wrap

28 Jul 2025

Contributed by Lukas

Tears, holes, and mystery micro-leaks—if wrap issues are slowing down your workflows, it might be time to understand what's really going on with you...

StreetClothes: The Mixologist

27 Jul 2025

Contributed by Lukas

On this episode of StreetClothes, we speak with a clinician with a passion for serving up something smooth, stirred, and served straight up with a twi...

Planet Assembly - Counting on Accuracy: The Power of a Well-Built Count Sheet

21 Jul 2025

Contributed by Lukas

Why do some trays come together like a perfect puzzle, while others feel like a never-ending scavenger hunt for missing instruments? This week, we're ...

Planet Assembly - Fast Track or Fault Line? Balancing Assembly Velocity with Vigilance

14 Jul 2025

Contributed by Lukas

Which is more important in assembly: speed or safety? Quality or quantity? On this episode of Beyond Clean's Planet Assembly, we sit down with Lindell...

StreetClothes: The Woodturner

13 Jul 2025

Contributed by Lukas

On this episode of our StreetClothes human-interest podcast series, we talk to a healthcare professional who finds calm, clarity, and a spark of creat...

Green Initiatives, Financial Impact | Expert Series On-The-Go

11 Jul 2025

Contributed by Lukas

On this week's edition of the Beyond Clean Expert Series On-The-Go, tune in for the conversation entitled, "Green Initiatives, Financial Impact," with...

Planet Assembly - Table Talk: Making your SPD Workstations Work

07 Jul 2025

Contributed by Lukas

Multiple sizes of peel packs, indicators scattered everywhere, and that "mystery drawer" of surprises—if this describes your assembly area, you're n...

Everything is Cleaner in Texas: Fighting Dirty in West Texas

05 Jul 2025

Contributed by Lukas

What does it really take to #FightDirty out in West Texas? In this week's episode of Everything is Cleaner in Texas, hosts Hank Balch and Dusty Glass ...

StreetClothes: The Hiker

29 Jun 2025

Contributed by Lukas

On this episode of StreetClothes, we talk to a healthcare professional who spends her time away from the hospital chasing trails and wide-open views. ...

Everything is Cleaner in Texas: SPD Recruiting & Retention in a Major Metroplex

28 Jun 2025

Contributed by Lukas

Everything's bigger in Texas—including the opportunities in Sterile Processing recruiting! In this week's episode of Everything is Cleaner in Texas,...

Everything is Cleaner in Texas: Autoclaves Aweigh, My Boys! SPD & the Navy

21 Jun 2025

Contributed by Lukas

Anchors aweigh, #CleanFreaks—it's time to set sail on a one-of-a-kind SPD journey! On this week's episode of Everything is Cleaner in Texas, hosts H...

StreetClothes: The Motorcyclist

15 Jun 2025

Contributed by Lukas

On this episode of our StreetClothes human-interest podcast series, we talk to a healthcare professional whose passion for two wheels brings freedom, ...

Everything is Cleaner in Texas: The Makings of a Sterile Processing Consultant

14 Jun 2025

Contributed by Lukas

From East Texas roots to healthcare systems nationwide, Juan Ramos is proving just how far a career in SPD can take you. In this week's episode of Eve...

Everything is Cleaner in Texas: Advocating (Well) for Your Department

07 Jun 2025

Contributed by Lukas

If you're not advocating for your department, who will? It's time to speak up—Texas style! On this week's episode of Everything is Cleaner in Texas,...

Planet Decontam: One Tech to Rule Them All? Tribal Knowledge & the Decon Risk

02 Jun 2025

Contributed by Lukas

What happens when only one person in your department knows how to reprocess a certain tray? Or find the IFU for that rarely used scope? Or figure out ...

StreetClothes: The Bakers

01 Jun 2025

Contributed by Lukas

On this episode of our StreetClothes podcast series, we talk to two healthcare professionals who find comfort, creativity, and a little pinch of calm ...

Everything is Cleaner in Texas: Leading with Purpose: Building Strong Teams, Texas Style

31 May 2025

Contributed by Lukas

SPD leaders don't just manage—they mentor, motivate, and make big things happen. And in Texas, that's how it's done! This week, host Dusty Glass sit...

Planet Decontam: Suit Up: PPE Essentials for Decontamination

26 May 2025

Contributed by Lukas

Time to suit up, #CleanFreaks—because this week we're tackling the real-world challenges of PPE! Join us as we sit down with Marcus Super from Maste...

Everything is Cleaner in Texas: Powered Up: The Hidden Costs of Equipment Failure

24 May 2025

Contributed by Lukas

Saddle up, #TexasCleanFreaks–because this week we're tackling one of the sneakiest budget-busters in SPD—power equipment failures! Join Dusty Glas...

Process Better: Instrument Insights: End-to-End SPD Expertise

20 May 2025

Contributed by Lukas

From missing instruments to delayed trays, delivering safe, on-time instrumentation is no easy feat. In this exciting series finale episode from our "...

Blood In the Water: An IP Perspective on Pathogen Exposures

19 May 2025

Contributed by Lukas

A tiny needle. A missed burr. A hidden blade at the bottom of the sink. These aren't just near misses—they're real exposure risks facing techs in de...

StreetClothes: The Beekeeper

18 May 2025

Contributed by Lukas

On this episode of the StreetClothes podcast series, we talk to a healthcare professional whose passion project is generating some serious buzz in his...