Chips and Tips Podcast
Episodes
#24 From CAM theory to shop floor reality with James Meyette
18 Dec 2025
Contributed by Lukas
CAM looks clean in theory. The shop floor decides if it actually works. In this episode of Chips and Tips, Tim Paul talks with James Meyette about wh...
#23 Can Devin Bodony Control the Chaos with Automation?
04 Dec 2025
Contributed by Lukas
In this episode of the Chips and Tips Podcast, I sit down with Devin Bedoni of Lycan Precision to explore the complexities of automation in CNC machin...
#22 Lights Out, Bots On with Graham Francis
20 Nov 2025
Contributed by Lukas
Justin sits down with automation nerd and Lights Out Manufacturing mastermind Graham Francis for a deep dive into the future of robot-tended machining...
#21 Get To Know Ben Engle of Toolpath
06 Nov 2025
Contributed by Lukas
Join me in this episode of the Chips and Tips Podcast as I sit down with Ben Engle, a multifaceted content manager at Toolpath. We dive deep into Ben'...
#20 Ride the Makera School Bus with Miss Frizzle (aka Lauren Fahey)
30 Oct 2025
Contributed by Lukas
In this exciting episode of the Chips and Tips Podcast, I sit down with Lauren Fahey, a mechanical engineer and self-proclaimed "Professional Badass."...
#19 Chips and Tips—So Bad It's Good (w/ Alex Rosner)
10 Oct 2025
Contributed by Lukas
Justin hosts Alex Rosner of Wisconsin CAM Solutions for an in-depth conversation on the art and science of shop ingenuity. Alex brings his dual perspe...
#18 Chips and Tips—Shake and Bake!
03 Oct 2025
Contributed by Lukas
Tim Paul sits down with Justin Gray, CTO of Toolpath, for a wide-ranging conversation about the craft, culture, and future of machining. Together they...
#17 Chips and Tips — Kevin Schneider
19 Sep 2025
Contributed by Lukas
In this episode of the Chips and Tips Podcast, I sit down with CAD/CAM legend Kevin Schneider, a key figure behind Autodesk's Fusion software. With ov...
#16 Chips and Tips — Pallet Load or Part Load? (Michael Gimbel, Gimbel Automation)
05 Sep 2025
Contributed by Lukas
When it comes to CNC automation, should you invest in pallet loading or part loading? In this episode of Chips and Tips, Justin sits down with Michael...
#15 Chips and Tips — Dr. Yavuz Murtezaoglu of ModuleWorks
22 Aug 2025
Contributed by Lukas
This week Justin sits down with Dr. Yavuz Murtezaoglu, the mind behind ModuleWorks, whose toolpath algorithms quietly run inside most CAM systems on t...
#14 Chips and Tips — Good Part, Then Fast Parts (w/ Chris Zappettini)
08 Aug 2025
Contributed by Lukas
Justin is joined by the one and only Chris Zappettini of Zappettini Consulting for a dive deep into one of their core mantras: “First we make good p...
#13 Chips and Tips — Template My Template
25 Jul 2025
Contributed by Lukas
Garrett Wade joins Justin to break down how smart use of Fusion 360 templates, container methods, and zero-point workholding can save hours on every j...
#12 Chips and Tips — Tyler Bonde from Mitsui Seiki
11 Jul 2025
Contributed by Lukas
Join me on the Chips and Tips Podcast as I chat with Tyler Bonde from Mitsui Seiki in episode #12. This episode marks my return to podcasting after re...
#11 Chips and Tips — Automation, Variability, and the Tyranny of Now (with Miguel Pinilla)
27 Jun 2025
Contributed by Lukas
In this episode of the Chips and Tips Podcast, I sit down with Miguel Pinilla, CTO of Arda Systems, to explore the intricate world of automation and v...
#10 Chips and Tips — Can Kanban Ban Me From Ordering Wrong?
13 Jun 2025
Contributed by Lukas
In this episode of the Chips and Tips Podcast, I dive deep into the world of Kanban with Uriel Eisen from Arda and Austere Manufacturing. We explore h...
#9 Chips and Tips – No Prints, No Problem w/ Jim Belosic of SendCutSend
30 May 2025
Contributed by Lukas
Join me, Justin from Toolpath Labs, as I dive into an engaging conversation with Jim Belosic, founder of SendCutSend, on this episode of the Chips and...
#8 Chips and Tips - To Quote Or Not To Quote?
16 May 2025
Contributed by Lukas
In this episode, Justin Gray (CTO at Toolpath) sits down with James Dyer (Accurate Dial and Nameplate) and Jon Rabinowitz (The Shop Inc.) to talk abou...
#7 Chips and Tips - Product Roadmap and Team Retreat
03 May 2025
Contributed by Lukas
Join me on the latest episode of the Chips and Tips Podcast, where I catch up with Pete, our Head of Product at Toolpath. We dive into his experiences...
#6 Chips and Tips - Mark Terryberry
18 Apr 2025
Contributed by Lukas
Join me, Tim Paul, on the latest episode of the Chips and Tips Podcast as I sit down with Mark Terryberry from Haas Automation, renowned for his role ...
#5 Chips and Tips – Speeds and Feeds
04 Apr 2025
Contributed by Lukas
Get ready to go deep. In this episode, Tim breaks down everything he’s learned over 25 years about cutting parameters—from chip load and flute cou...
#4 Chips and Tips - Dylan Jackson
20 Mar 2025
Contributed by Lukas
In this episode of the Chips and Tips Podcast, I sit down with Dylan Jackson, co-owner of Protean Machining and host of the Within Tolerance podcast. ...
#3 Chips and Tips - Chris Zappettini
07 Mar 2025
Contributed by Lukas
Join me, Tim Paul from Toolpath, on the third episode of the Chips and Tips Podcast as I sit down with Chris Zappettini from Zappettini Consulting. We...
#2 Chips and Tips - What's The Chatter About Chatter?
14 Feb 2025
Contributed by Lukas
In this episode of the Chips and Tips Podcast, I dive into the exciting merger of Toolpath and Chatter, exploring what this means for the future of ma...
#1 Chips and Tips - Meet The Team!
11 Feb 2025
Contributed by Lukas
Welcome to the inaugural episode of the Chips and Tips Podcast, where I, Ben Engel, along with the Toolpath Customer Success Team, dive into the lates...