Episode 2 – Tools Every Apprentice Electrician Needs

If you’re about to start your career as an electrician but don’t have a clue what tools you need, feel free to consult this list.  In this video I talk about all of the tools that I deem necessary to start your career with.  There will be endless tools that you will buy through the years but these are the basics that every apprentice electrician needs.In order as they appear, I also time-stamped each tool so you can find them easier.  If you’d like to buy them I’ve put links to each tool on Amazon below so you can order them for hella cheap rather than paying Home Depot prices.First up is to get a good pouch. You’ll need a two-sided pouch with a hammer loop and a tape chain. One side of the bag should have storage for your hand tools, the other side should have multiple pouches for storing staples, screws, wirenuts, pens/pencils, markers, and a tape measure. You’ll want a separate hammer loop (one thing I forgot to mention in the video…a hammer!) that hangs behind you from the belt. Its a lot easier to have a hammer hanging from behind you than off to the sides smacking into your legs all day. (0:56)Klein 10″ flat-head screw driver with a 3/8″ tip. (1:12) Klein long-shaft 6-in-1 multitool (1:31) Stanley Sheetrock Saw (2:33)Klein Lineman’s Pliers (2:58) Klein Side-cutting Pliers (3:30) Klein Small Wire-Strippers (4:12) Klein Large Wire-Stripper/Crimper/Bolt-Cutter Combo Tool (4:38) Klein Needle-Nose/Stripper Combo Tool (5:38)Fluke T5-600 Multi-meter (6:23)Klein #2 Square (Robertson) Driver (7:39)Klein ¼” – 9/16” Nut Drivers (more specifically 3/8”, 11/32”, 7/16”, and ½”) [your 6-in-1 will come with a ¼” and 5/16” so you don’t need to get these] (8:26) Klein Mini terminating screwdrivers (Philips and Flathead) (9:42) Want to learn more about becoming an electrician or mastering the craft? Visit ElectricianU.com for courses, resources, and everything you need to succeed!

There are no comments yet.

Please log in to write the first comment.