Episode 21 – Installing A Residential Occupancy Sensor, And Changing It’s Settings

In my house we have an issue with some people leaving lights on, specifically in the garage. After hounding on the issue, I decided to get a cheap occupancy sensor and install it in the garage to take care of the problem.What is an occupancy sensor?As the term indicates, an occupancy sensor is a devices that “senses occupancy” or movement. It is able to, through using forward facing infrared technology, “see” a static room and notice if any movement occurs. Once it detects movement it closes the circuit and turns the lights in that room on, rather than relying on the manual action of a human to flip a light switch. There are many types of Occupancy Sensors on the market, some commercial grade for shops and warehouses, others for typical residential use. The one I’m using in this video is a standard residential model that most electricians are familiar with.Prep WorkFirst things first, since this device is a direct replacement for a decor switch, I removed the existing switch from the wall box in my garage. The wiring I found in the wall was sub-par so I had to address this issue first. Whatever electrician wired this place back in the late 60’s, did not pigtail the hots – instead daisy-chaining them together. This is not inherently bad, it’s just a lazy wiring method that causes anyone doing work later to have to address both switches rather than just working on the one in need. How I like to wire switches is by installing independent hot pigtails so that each device has its own wire, not shared by another device. So this is the first thing I redid. A professional electrician who cares about quality and craftsmanship will always look at everything surrounding what he/she is repairing or replacing. It is a great habit to get into, as a lot of times you’ll find other problems that can save your customers money and system efficiency down the road. In doing so I was able to find another issue. Neither of the existing switches had ground wires (equipment grounding conductors) attached to the ground terminals on the devices. This is a big code no-no. Any metal parts around electrical equipment must be bonded to the equipment grounding system, as well as the devices Want to learn more about becoming an electrician or mastering the craft? Visit ElectricianU.com for courses, resources, and everything you need to succeed!

There are no comments yet.

Please log in to write the first comment.