ELECTRIFY™ | Electrician Podcast

Let's Ask Paul | Episode 70 | 12 AWG and its amps, Motor Tables, and More

09 Jul 2022

Contributed by Lukas

Join Paul Abernathy for another episode of Let's Ask Paul from www.PaulAbernathy.com. In this episode, Paul answers the question of using motor namepl...

Let's Ask Paul | Episode 69 | Helping answer a Real-World Transformer Sizing Request

04 Jul 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers another question from a submission via the Let's Ask Paul Portal at...

Let's Ask Paul | Episode 68 | Verifying an Electrician's Code References for Fire Incident

26 Jun 2022

Contributed by Lukas

Join Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., a premier electrical code training academy located in Texas. Today's question ...

Let's Ask Paul | Episode 67 | (2) 100A Panels supplied by 125A Main & More

26 Jun 2022

Contributed by Lukas

Join Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc. as he answers another question from those submitted via PaulAbernathy.com and t...

Let's Ask Paul | Episode 65 | Paul and Jay Talk about the Schneider Load center Recall

19 Jun 2022

Contributed by Lukas

Listen as Paul Abernathy and Jay Grundberg chat about the recent recall for the Schneider QO with the plug-on neutral load center recall. With over 1....

Let's Ask Paul | Episode 66 | Metal Boxes and Equipment Bonding Jumper Question

19 Jun 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers another question submitted via the Let's Ask Paul Portal at www/Pau...

Let's Ask Paul | Episode 64 | So you wanna be a Electrical Inspector

11 Jun 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers more electrical code-related questions from folks who submit questi...

Let's Ask Paul | Episode 63 | Ampacity of NM Cable and Subby's Bruh at Detached Garages

11 Jun 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers more electrical code-related questions from folks who submit questi...

Let's Ask Paul | Episode 62 | Questions on Exam Prep, Neutral Colors, and Temporary NM Cable

20 May 2022

Contributed by Lukas

Listen as Paul Abernathy, Founder and CEO of Electrical Code Academy, Inc. and creator of the Fast Trax® National Electrical Code Learning System ans...

Ask Paul | Episode 61 | Sizing Conductors Let's to AC Motor Compressor

14 May 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO, and President of Electrical Code Academy, Inc. answers another question submitted via the portal at www.PaulAbernathy.c...

Let's Ask Paul | Episode 60 | Explaining Transformer Protection in 450.3(B)

14 May 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO, and President of Electrical Code Academy, Inc. answers another question submitted via the portal at www.PaulAbernathy.c...

Let's Ask Paul | Episode 59 | Understanding 150V or less to ground and 150V or more to ground

08 May 2022

Contributed by Lukas

Join Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. and the creator of the Fast Trax® NEC Learning System. On this episode of Let's...

Let's Ask Paul | Episode 58 | Receptacle Spacing, Bus Ratings, and Ranges

08 May 2022

Contributed by Lukas

Join Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. and the creator of the Fast Trax® NEC Learning System. On this episode of Let's...

Let's Ask Paul | Episode 57 | Conductors at Subby's Bruh and Straight/Slash Rated Breakers

02 May 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answer questions submitted on PaulAbernathy.com at the Let's Ask Paul. On t...

Let's Ask Paul | Episode 56 | To Our Present and Future Students - You Are Why We Do This!

25 Apr 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers another question submitted via the Let's Ask Paul Portal at www.Pau...

Let's Ask Paul | Episode 55 | Why we don’t just drive ground rods everywhere, like for Receptacles

25 Apr 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers another question submitted via the Let's Ask Paul Portal at www.Pau...

Let's Ask Paul | Episode 54 | Three Gang and Larger Box Support and More

25 Apr 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy answers more submitted questions from the Let's Ask Paul Portal at www.PaulAberna...

Let's Ask Paul | Episode 53 | Wago's and BackStabbing....Ok Haters....LOL

17 Apr 2022

Contributed by Lukas

Join Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., a premier provider of electrical exam preparation training and post licensing e...

Let's Ask Paul | Episode 51 | Multiwire Branch Circuits, Pigtails, and Listed Wall Mounted Devices

17 Apr 2022

Contributed by Lukas

Join Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., a leading electrical educational provide for learning the National Electrical C...

COFFEE HOUR | Single Motor Branch Circuit Calculations

13 Apr 2022

Contributed by Lukas

Join Paul Abernathy, Master Electrician and Founder and CEO of  Electrical Code Academy, Inc. as he explains something seldom seen on an electrical e...

COFFEE HOUR | Are Kenny Clamps Required

13 Apr 2022

Contributed by Lukas

[REPLAY] - Join Paul Abernathy as he talks about Kenny Clamps, and GECs  in Ferrous Raceways and Enclosures, Gas Pip Bonding and so much more in  th...

Electrical Exam Prep | Pass Your Electrical Master Electrician Exam

13 Apr 2022

Contributed by Lukas

To discover more about master electrician and journeyman electrician  electrical exam preparation training, PLEASE check out: ➡  https://www.elect...

Electrical Exam Preparation | Using the Fast Trax NEC Learning System

13 Apr 2022

Contributed by Lukas

To discover more about master electrician and journeyman electrician  electrical exam preparation training, PLEASE check out: ➡  https://www.elect...

Let's ASk Paul | Epsiode 50 | Dedicated Equipment Space and Raceways Aboveground on the Earth

29 Mar 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers another question submitted via PaulAbernathy.com. The Let's Ask Pau...

Let's Ask Paul | Episode 49 | General Contractor learning electrical to aid in hiring electricians

29 Mar 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. as he talks all things electrical based on submitted questions via the Paul...

Let's Ask Paul | Episode 48 | Getting NM-B Into an Exterior Panel and Neutral Sizing Question

12 Mar 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of the nation’s leading electrical exam preparation and National Electrical Code learning system called th...

Fast Trax® Electrical Exam Preparation | Electrical Exam Prep Program

08 Mar 2022

Contributed by Lukas

Find out more about "journeyman electrician exam" and "master electrician exam" you need to check out: ? https://www.electricalcodeacademy.netOur vide...

Electrify™ | Wiring A Kitchen for Electicians and Electrical Contractors

03 Mar 2022

Contributed by Lukas

Join Paul Abernathy on an episode where they talk Kitchens. In this episode the hosts will cover common topics on electrical wiring to kitchens and th...

Electrify™ | How To Use The Fast Trax Electrical Exam Preparation Program

03 Mar 2022

Contributed by Lukas

Watch as Paul Abernathy walks you along a journey of finding answers to common code questions in the National Electrical Code and how the Fast Trax Pr...

Coffee Hour | Single Family Dwelling Calculations

03 Mar 2022

Contributed by Lukas

Join Paul Abernathy for a great episode on Single Family Dwelling Calculations. To listen to all our episodes and watch our videos check out www.Elect...

Let's Ask Paul | Episode 47 | When do you count neutrals as current carrying conductors

24 Feb 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founded of Electrical Code Academy, Inc. answers questions submitted from PaulAbernathy.com. This episode answers th...

Let's Ask Paul | Episode 46 | Grounding Electrode Conductors in Metal Raceways with PVC Boxes

24 Feb 2022

Contributed by Lukas

Listen as Paul Abernathy answers questions submitted to PaulAbernathy.com. In this episode, Paul answers questions on GECs and when they are installed...

Let's Ask Paul | Episode 45 | GFCI's and distances to sinks through doorways and growth advice

24 Feb 2022

Contributed by Lukas

Listen as Paul Abernathy answers questions submitted to PaulAbernathy.com. In this episode, Paul answers questions on GFCIs and within 6' of sinks, an...

Let's Ask Paul | Episode 44 | Conductor Ampacity and Conditions of Use Questions

13 Feb 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers a question about adjustments and corrections for a conductor based ...

Let's Ask Paul | Episode 43 | Electrical Exam Preparation Assumptions and AFCI's on Upgrades

12 Feb 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the premier electrical exam preparation and National Electrical Code learn...

Let's Ask Paul | Episode 42 | Single Family Dwelling Load Calculation - Standard Method

12 Feb 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers a question about the steps to a standard method calculation for a s...

Let's Ask Paul | Episode 41 | Raised Floor or Wall Space and Daisy Chained Luminaries

03 Feb 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers a question about wall space versus a raised floor with a front and ...

Let's Ask Paul | Episode 40 | Electrical In Flood Zone and FEMA

03 Feb 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. and MasterTheNEC responds to a submitted question about basements in flood ...

Let's Ask Paul | Episode 39 | Explaining 312.2 and 314.15 for Wet and Damp Locations

03 Feb 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers another question that was submitted via PaulAbernathy.com and the A...

Let's Ask Paul | Episode 38 | 10' Tap Rule Explained

22 Jan 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. and creator of the CMECP® Certification Program explains the 10' tap rule ...

Let's Ask Paul | Episode 37 | Supplemental Grounding Electrodes Explained

15 Jan 2022

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers a question about supplemental grounding electrodes and which electr...

Electrify™ | January 6, 2022 Episode - Bidding Jobs

15 Jan 2022

Contributed by Lukas

Listen to the January 6th, 2022 Episode of Electrify Podcast where the hosts talk about bidding jobs.Become a supporter of this podcast: https://www.s...

Let's Ask Paul | Episode 36 | 310.12 Explaining the 83% Rule

15 Jan 2022

Contributed by Lukas

Join Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. as he explains the 83% minimum conductor sizing rules when using 310.12 of the 2...

Let's Ask Paul | Episode 35 | 210.12(D), Double Lugging, and Electrical Inspector Advice

03 Jan 2022

Contributed by Lukas

Listen as Paul Abernathy, a nationally renowned expert on the National Electrical Code answers more questions submitted via the Ask Paul Portal at www...

ELECTRIFY | Let's Ask Paul Episode 34 | AFCI Devices and Bedrooms

29 Dec 2021

Contributed by Lukas

Listen as Paul Abernathy answers a question submitted via the PaulAbernathy.com portal. Today's question is centered around AFCI Protection in the rec...

Let's Ask Paul | Episode 33 | Please explain the exceptions in 230.40 in more detail

24 Dec 2021

Contributed by Lukas

Listen as Paul Abernathy receives and answers another question submitted via PaulAbernathy.com. Today's podcast is explaining the exceptions found in ...

Let's Ask Paul | Episode 32 | NM-B in a Raceway in Unfinished Basement

21 Dec 2021

Contributed by Lukas

Listen as Paul Abernathy answers a question about the installation of NM-B in an unfinished basement. This question was submitted via www.PaulAbernath...

Let's Ask Paul | Episode 31 | What did I use when boring under sidewalks and driveways

21 Dec 2021

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. tackles another question submitted via PaulAbernathy.com, the Let's Ask Pau...

Let's Ask Paul | Episode 30 | Questions on Supply-Side Objectionable Current

21 Dec 2021

Contributed by Lukas

Join Paul Abernathy as he tackles another question submitted via PaulAbernathy.com. Today's question is about acceptable levels of objectionable curre...

ELECTRIFY™ | Do Home Inspectors Bring Value To Electricians?

17 Dec 2021

Contributed by Lukas

Listen as your hosts Paul Abernathy and Jay Grundberg discuss the value of home inspectors to electricians as well as homeowners. This is the audio po...

Let's Ask Paul | Episode 29 | Manual Transfer Switch Question Submitted

12 Dec 2021

Contributed by Lukas

Join Paul Abernathy as he answers a question submitted on what happens when you install a manual transfer switch between the meter and the service dis...

ELECTRIFY™ Podcast - What Happened To The Basement King - Electricians Only

07 Dec 2021

Contributed by Lukas

Listen as Paul Abernathy and jay Grundberg chat about an unfortunate incident that happened recently to Jay "The Basement King" Grundberg and it can h...

ELECTRIFY™ PODCAST | What Happened To The Basement King?

07 Dec 2021

Contributed by Lukas

Listen as Paul Abernathy and jay Grundberg chat about an unfortunate incident that happened recently to Jay "The Basement King" Grundberg and it can h...

The ELECTRIFY Podcast | Introduction of ELECTRIFY for Electricians

26 Nov 2021

Contributed by Lukas

Introducing the new ELECTRIFY™ Platform with your Hosts Paul Abernathy and Jay "The Basement King" Grundberg. The revamped video and podcast series ...

Let's Ask Paul | Episode 28 | Are metal plates or sleeves required on MC Cable in Metal Stud?

25 Nov 2021

Contributed by Lukas

Join Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. as he answers a question submitted to Let's Ask Paul through the portal at www.P...

Let's Ask Paul | Episode 27 | Understanding Receptacle Ratings for 15 and 20 Amp Circuits

23 Nov 2021

Contributed by Lukas

Listen as Paul Abernathy answers another question from PaulAbernathy.com. This episode Paul answers a question about receptacle ratings and circuit br...

Let's Ask Paul | Episode 26 | Calculating Minimum General Use Lighting and Receptacle Branch Circuits

23 Nov 2021

Contributed by Lukas

Join Paul Abernathy, CEO and Founder as he answers an electrical question submitted via PaulAbernathy.com, the online electrical portal for getting al...

Let's Ask Paul | Episode 25 | Pull Box and Junction Box Calculation Overview

23 Nov 2021

Contributed by Lukas

Listen as Paul Abernathy explains pull box calculations for someone who submitted a question via the paulabernathy.com portal.Become a supporter of th...

Electricians | Availability of whole-house AFCI and GFCI panels and receptacles in garages question

31 Oct 2021

Contributed by Lukas

Listen as Paul Abernathy, a nationally recognized expert on the National Electrical Code answers questions that have been submitted via Ask Paul, the ...

Let's Ask Paul | GFCI's on Mini-Splits and EMT used as a support component

31 Oct 2021

Contributed by Lukas

Listen as Paul Abernathy, a nationally recognized expert on the National Electrical Code answers questions that have been submitted via Ask Paul, the ...

Let's Ask Paul | Episode 18 | When can I use Table 310.12 for service and feeder sizing?

11 Sep 2021

Contributed by Lukas

Listen as Paul Abernathy, a nationally recognized expert on the national electrical code answers a question submitted regarding the 310.12 for the 83%...

Let's Ask Paul | Episode 17 | Can THHN/THWN-2 be installed in cable trays?

11 Sep 2021

Contributed by Lukas

Listen as Paul Abernathy, a nationally recognized expert on the national electrical code answers a question submitted regarding Article 392 and the in...

Let's Ask Paul | Episode 16 | Does the two to six disconnect rule still exist?

11 Sep 2021

Contributed by Lukas

Listen as Paul Abernathy, a nationally recognized expert on the national electrical code answers a question submitted regarding the 230.71(B) and the ...

Let's Ask Paul | Episode 15 | Type NM-B Outside and Type MC Outside Facts

11 Sep 2021

Contributed by Lukas

Listen as Paul Abernathy answers a submitted question on the use of Type NM-B Cable and Type MC Cable in wet locations.Become a supporter of this podc...

Electricians UNITE | Sizing Overhead, Underground, Service Entrance Conductors

18 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy answers a question on which sections of the 2020 National Electrical Code do you use to size overhead service conductors, und...

Article 625 Electric Vehicles Part 4

18 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy, a nationally recognized expert on the National Electrical Code as he explains Electric Vehicles and Article 625 of the NEC.-...

Article 625 Electric Vehicles Part 3

18 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy, a nationally recognized expert on the National Electrical Code as he explains Electric Vehicles and Article 625 of the NEC.-...

Article 625 - Electric Vehicles Part 2

18 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy, a nationally recognized expert on the National Electrical Code as he explains Electric Vehicles and Article 625 of the NEC.-...

Article 625 - Electric Vehicles Part 1

18 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy, a nationally recognized expert on the National Electrical Code as he explains Electric Vehicles and Article 625 of the NEC.-...

Code In Five | Episode 19 | Explaining Table 110.26 and the conditions

18 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy explains the use of Table 110.26(A)(1) in the 2020 National Electrical Code as well as the various conditions that can affect...

Code In Five | Episode 18 | GFCI's for Appliances 422.5(A) and (B)

18 Jul 2021

Contributed by Lukas

Listen as Paul explains GFCI protection for appliances in the 2020 National Electrical Code and more specifically section 422.5(A) and (B), along with...

Code In Five | Episode 17 | Receptacle Ratings Explained Table 210.21(B)(3)

18 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy explains receptacle ratings of 210.21(B)(3) in 5 minutes or less.--- This episode is sponsored by · Anchor: The easiest way ...

Code In Five - Episode 16 | Receptacles in Foyers Explained

18 Jul 2021

Contributed by Lukas

Listen to another episode of Code and Five as Paul Abernathy attempts, and fails on most attempts, to explain the NEC in 5 minutes or less. Such as th...

Code In Five - Episode 15 | Free Conductors in Outlets, Junctions, and Switch Points

18 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy talks about Section 300.14 and Free Conductors length necessary in junction boxes, outlet boxes, switch points within boxes, ...

Code In Five - Episode 14 - 5 Minutes of electrical code with Paul Abernathy

18 Jul 2021

Contributed by Lukas

In today's Code in Five Paul talks about the use of bonding jumpers and are they required for transformers and other applications on the load side of ...

Code in Five | Episode 13 | 5 Minutes of electrical code with Paul Abernathy

18 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy talks about the Ceiling Suspended (Paddle) Fan Box requirements in 314.27(C) and the change associated with it for the 2020 N...

Code In Five - Episode 12 - 5 Minutes of electrical code with Paul Abernathy

18 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy talks about the use of Type TC- Power and Control Cable for service entrance applications and what you need to know about the...

Code in Five | Episode 11 | 5 Minutes of electrical code with Paul Abernathy

18 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy does his best in explaining terminal provisions for over 100A or less or conductors 1/0 AWG and larger per 110.14(C)(1)(b). B...

Code In Five - Episode 10 - 5 Minutes (Sorry 6 1/2 minutes) of electrical code with Paul Abernathy

18 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy FAILS yet again to explain the NEC in 5 minutes or less. In fact, maybe we should call it Code in 5, 6, 7, or 8 minutes. Anyw...

Code In Five - Episode 9 - 5 Minutes of electrical code with Paul Abernathy

18 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy explains Conductive Pool Shells and the requirements for Perimeter Bonding in this fast-paced episode. When exactly is a pool...

Code In Five - Episode 8 - 5 Minutes of electrical code with Paul Abernathy

18 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy talks about the Re-identification of an insulated conductor other than green, white, or gray as a grounded conductor. This sh...

Code In Five - Episode 5 - 5 Minutes of electrical code with Paul Abernathy

18 Jul 2021

Contributed by Lukas

Listen as Paul explains Table 250.66 and 250.66(A),(B), and (C) when deciding which you go with depending on the type of electrode you are working wit...

Code In Five - Episode 4 - 5 Minutes of electrical code with Paul Abernathy

18 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy talks about the new 230.67 requirements for services supplying dwelling units in the 2020 National Electrical Code.--- This e...

Code In Five - Episode 2 - 5 Minutes of electrical code with Paul Abernathy

18 Jul 2021

Contributed by Lukas

Join Paul Abernathy as he examines 300.14 Free Conductor in this 5-minute code lesson.--- This episode is sponsored by · Anchor: The easiest way to m...

Code In Five - Episode 1 - 5 Minutes of electrical code with Paul Abernathy

18 Jul 2021

Contributed by Lukas

Listen to our latest series called Code in Five with Paul Abernathy. This week's 5 minutes is on 210.11(C)(1) through (C)(4). The required branch circ...

Electricians UNITE - Paul & Jay's Top 5 Inspection Common Failures

18 Jul 2021

Contributed by Lukas

Join Paul and Jay on this episode of Electrician LIVE where they talk about their top common inspection fails seen in the field. This should be a grea...

Electricians UNITE | Commentary on EC & M Magazine Article - Microwave Madness

10 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy, Founder, and CEO of Electrical Code Academy, Inc. talks about a recent article in EC & M Magazine and attempts to add additi...

Electricians UNITE | Lets talk Working Clearances in 110.26 in 5 minutes

10 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy explains the use of Table 110.26(A)(1) in the 2020 National Electrical Code as well as the various conditions that can affect...

Electricians UNITE | Can you Tap a Tap and Ambient Temperature Corrections

04 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. answers questions submitted via www.PaulAbernathy.com and the Ask Paul Port...

Electricians UNITE | Electrician Questions and Answers Session Episode 3

04 Jul 2021

Contributed by Lukas

Listen as Paul Abernathy, Founder, and CEO of Electrical Code Academy, Inc. answers questions on detached structures disconnection means as well as a ...

Electricians UNITE | June Only Special - get all our 2017 and 2020 NEC Bundle Courses for 24 months

08 Jun 2021

Contributed by Lukas

Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy. Inc. announces a SPECIAL JUNE 2021 ONLY sale where you get EVERYTHING for the 2...

Electricians UNITE - Electricians and Meeting Room Outlets per 210.65(A) and (B)

05 Jun 2021

Contributed by Lukas

Listen as Paul Abernathy explains the rules for receptacle outlets and outlets in general in meetings rooms as described in 210.65 of the 2020 Nationa...

Electricians UNITE | Explaining the basics of Series and Parallel circuits

01 Jun 2021

Contributed by Lukas

Greetings as Paul Abernathy, CEO and President of Electrical Code Academy, Inc. talks about the principles of Series and Parallel Circuits when studyi...

Electricians UNITE | How to set the best impression on your customer

26 May 2021

Contributed by Lukas

Listen as Paul Abernathy talks about the 3 stages of impressions that you give a customer on a job site or with a potential customer. This applies to ...

Electricians UNITE | Pull Box Calculations for Electricians

26 May 2021

Contributed by Lukas

Listen as Paul Abernathy talks, and yes gets redundant, on pull box calculations and how they can differ in real life versus electrical exams. Paul wi...

Electricians UNITE | Episode 18 | Code in 5 - GFCI's and Appliances

06 May 2021

Contributed by Lukas

Listen as Paul explains GFCI protection for appliances in the 2020 National Electrical Code and more specifically section 422.5(A) and (B), along with...

Electricians UNITE | Lighting Outlet Requirements for Dwellings

05 May 2021

Contributed by Lukas

Join Paul Abernathy as he explains the lighting outlet requirements in 210.70(A) for Dwelling Units. There is always some confusion on what outlets ar...

Electricians UNITE | Webinar Notice | Feeder Taps and XFMR Secondary Conductor Rules

01 May 2021

Contributed by Lukas

We are excited to announce this May 22, 2021, Webinar on the 2020 National Electrical Code. This webinar will focus on Section(s) 240.21(B) Feeder Tap...

Electricians UNITE | Code In 5 | Episode 17 - Receptacle Ratings Explained

21 Apr 2021

Contributed by Lukas

Listen as Paul Abernathy explains receptacles ratings in 5 minutes or less.Become a supporter of this podcast: https://www.spreaker.com/podcast/electr...

Electricians UNITE | Earn 10% commissions and more with our affiliate program

01 Apr 2021

Contributed by Lukas

Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. talks about their new Affiliate Program on all their electrical training pr...