HVAC Shop Talk
Episodes
Why is there Hate in the Trade? | R421A and R427A Refrigerant Discussion
19 Jul 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack discusses two different subjects. in the first half of the podcast he explores the theories that explain why t...
Monica Guerriero | The Other Side of the HVAC Trade
17 Jul 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack talks to Monica G. Monica is an office employee at a mid-sized HVAC company in the Charlotte, NC area. Monica ...
Veto App, Monkey Butt Powder, and Beating a Dead Horse!!
14 Jul 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack talks to guys in the live chat about a variety of products, services and odd subjects.
The Home Chiller Project | Who's That YouTuber??
12 Jul 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack discusses a heat pump water cooler/heater system he wants to build for his studio. Ralph joins in for the seco...
Matt McKinney | Line Set Flush - Good or Bad?
09 Jul 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Zack Psioda talks to Matt McKinney from ICOR/Chemours. Matt addresses the complaints about line set flush and discus...
Zack and Ralph Talk to HVAC Techs in the Field
07 Jul 2018
Contributed by Lukas
In this episode of HVAC Shop Talk podcast, Zack Psioda and Ralph Wolf talk with techs in the field. This show was recorded from a live HST Radio strea...
Dangers of Working in the Heat | Conversation with Alexander F.
05 Jul 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack talks about heat stroke and heat exhaustion. Guys working in hot environments need to take special care so the...
Zack Addresses the Listeners | God, Family and HVAC
03 Jul 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack talks about the birth of his son Jackson Tucker. He also touches on some non-HVAC subjects that hit close to h...
Ralph W., Kannon C. and Brandon B. | Bosch Comments and Tech Talk
29 Jun 2018
Contributed by Lukas
In this episode of HVAC Shop Talk podcast Zack takes calls from several guys. Zack and Ralph talk about the Bosch debate, Kannon talks Flex Seal and t...
Bosch Heat Pump Inverter Debate |The Final Round | Joe vs. Ralph
27 Jun 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Joe Shearer debates Ralph Wolf on the worth of the Bosch Heat Pump Inverter.
Zack and Ralph Take Phone Calls from HVAC Techs
25 Jun 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Zack and former co host Ralph take phone calls from HVAC techs in the field. The guys talk everything from VRF to Te...
Staying Hydrated & Tech Talk w/ Mike P. and Nick G.
22 Jun 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack talks about staying hydrated on these hot summer days. Zack also takes calls from twos guys in the field, Nick...
Andrew Greaves | Chiller Service Call & John P. | Criticizing HVAC YouTubers
20 Jun 2018
Contributed by Lukas
In this two segment episode, Zack Psioda talks to AK Greaves (AK HVAC) and listener John P. (taken from HST Radio). AK talks about a Trane screw chill...
Shop Talk Podcast Hangout | 3
18 Jun 2018
Contributed by Lukas
This episode of HVAC Shop Talk is taken from the HST hangout streamed live to YouTube on 6/16/18. Make sure to subscribe to HVAC Shop Talk Podcast to...
#SWAGSunday Preview | 6/17/18 | Guest Andrew Greaves (AK HVAC)
16 Jun 2018
Contributed by Lukas
In this episode of HVAC Shop Talk podcast, Zack previews the 6/17/18 #SWAGSunday with guest Andrew Greaves. The guys take calls from listeners and eve...
#SWAGSunday | 6/10/18
14 Jun 2018
Contributed by Lukas
This is an audio cut from #SWAGSunday. This is the first episode where we had live call on for the winners. Thanks to Brent Ridley from Tool Pros Podc...
Greg Fox | Permits, Licensing and Job Site Load Calculation
13 Jun 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack Psioda talks to Greg Fox from Fox Family Heating and Air. Greg talks about his experiences acquiring permits, ...
Shop Talk Podcast Hangout | 1
11 Jun 2018
Contributed by Lukas
This episode of HVAC Shop Talk is a group Hangout first broadcast on the HVAC Shop Talk Podcast YouTube channel. The following fine folks stop back to...
#SWAGSunday Preview Show | 6/10/18 | Live Podcast
09 Jun 2018
Contributed by Lukas
This is the #SWAGSunday preview show for 6/10/18. The #SWAGSunday preview show is a live event broadcast on YouTube and HST Radio on 8:30 PM eastern S...
Gil Cavey | HVAC Uncensored
07 Jun 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack talks to Gil Cavey. All eyes are on Gil to see what his next move will be since he left the HVAC After Dark po...
Catching Up With Ralph Wolf | HVAC (and MORE!) Discussion
04 Jun 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Zack sits down and catches up with Ralph Wolf. The boys talk HVAC systems, technology, Zoomlock and so much more. In...
The Service Call from Hell | Oxygen and Oil (BANG) | Emails Answered
30 May 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack does a free for all. He talks about an awful service call, a common relay failure, dangers of oxygen and oil a...
HVAC Service Method 1 | Compressor and Fan Won't Run | Frozen Coil
25 May 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack Psioda talks about service calls diagnosing and troubleshooting. Many times we see units that have fan motors ...
Brent Ridley | Navac HVAC Tools, Tool Bag Load Out, and Discussion
20 May 2018
Contributed by Lukas
Brent Ridley (the original co co host) is back to talk HVAC tools. Brent and Zack talk Navac tools, Fieldpiece, tool bags (and their contents) plus ma...
Curtis Bowers | #Curtisrants | Inspectors and Permitting
15 May 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack Psioda talk with Curtis Bowers. He gives his controversial opinion of the permit and inspections process in hi...
Debnam Job 1 | Duct Design Strategy | Email Questions Answered
11 May 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack Psioda talks about the design of duct systems at a job he is working on. The job is in the rough in phase. Tru...
NATE Practice Test #2 | Andrew Greaves (AK HVAC) Talks VRV/VRF Start Up
08 May 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Zack takes a NATE practice test and does......OK. Also, Zack sits down with Andrew Greaves and talks VRV/VRF start u...
HVAC Field Perspective on Spray Foam, ERV, and a New Goodman System | Cautionary Tale
04 May 2018
Contributed by Lukas
In this episode of HVAC Shop Talk I discuss going back into the field to work on a high efficiency home installation. My brother, Terry, and I are ins...
Tom Powell |Daikin VRV Troubleshooting
01 May 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack talks to commercial HVAC/R technician Tom Powell. Tom works for the school system and deals with a number of D...
Superheat, Subcooling, and Basic HVAC/R Refrigerant Charging
27 Apr 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack talks HVAC/R superheat, subcooling and charging. Zack talks about spotting some charging and system issues.
Useless HVAC Tools
20 Apr 2018
Contributed by Lukas
In this episode of the HVAC Shop talk podcast, Ralph and Zack talk about HVAC Tools. In particular, they discuss tools that have passed their prime, n...
Joe Shearer | Bosch Inverter Heat Pump WAR!!
17 Apr 2018
Contributed by Lukas
In this episode of HVAC Shop Talk the guys discuss what the Bosch inverter heat pump can and can't do with Joe Shearer. The boys don't hold back as th...
Digital Multimeters | Features and Functions
13 Apr 2018
Contributed by Lukas
IN this episode of HVAC Shop Talk, Zack and Ralph discuss DMM features and functions. Our buddy Andrew Greaves (AK HVAC) drops in to help us with one ...
Matt McKinney | R22 Retrofits 2 | Charging, Refrigeration Applications, and Service Practices
10 Apr 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack and Ralph continue their conversation with Matt McKinney. The boys discuss R22 retrofit charging, retrofitting...
Matt McKinney | R22 Retrofit Refrigerants 1 | Myths, Guidelines and Oil Return
06 Apr 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Ralph and Zack talk to Matt McKinney from ICOR International. This podcast is the first in a series about R22 retro...
25 Years in HVAC |1993-2018
03 Apr 2018
Contributed by Lukas
In this episode of HVAC Shop talk Zack and Ralph reflect on HVAC industry changes that have occurred over the last 25 years.
Andrew Greaves | Tools, Apprentices and the Great Glass Air Conditioner
30 Mar 2018
Contributed by Lukas
Andrew Greaves (AK HVAC) drops in to talk about apprentices, social media, tools, and the great glass air conditioner.
HVAC Conflict & Resolution | The Break-in & the DSG
27 Mar 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Ralph and Zack talk about conflicts in the HVAC world. This episode focuses on man vs. man and man vs. himself strug...
Robert Stringham | Huge R-Log App Update!
23 Mar 2018
Contributed by Lukas
Robert Stringham drops by HVAC Shop Talk to talk with Zack and Ralph about the huge app update for R-Log. Zack and Ralph also discuss bookkeeping apps...
HVAC | The Unskilled Trade?
20 Mar 2018
Contributed by Lukas
In this episode of HVAC Shop talk, Ralph and Zack discuss advancements in the HVAC trade. The focus of these discussions will be to ascertain if the H...
Joe Shearer | New HVAC Business & Bosch Inverter Debate
16 Mar 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack and Ralph talk with HVAC business owner Joe Shearer. Joe discusses his new business and why he thinks the Bosc...
The Hack-or-Not Challenge | 1
13 Mar 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Ralph and Zack discuss trade practices that hover on the line between innovative and incompetent.
HVAC Relays | 1
09 Mar 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Ralph and Zack talk about the various relays they stocked during their service careers. The guys also talk about ou...
EPA 608 Practice Test | Kannon Casey Interview
06 Mar 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Ralph and Zack take a practice EPA 608 core test. In part 2 of the podcast Kannon Casey drops buy to talk trade scho...
Doing "Manual" Labor | Simple Training for HVAC/R Techs
02 Mar 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Ralph and Zack discuss the benefits of reading an installation manual. It does more than you think!
Bluon TdX 20 | The Best R22 Replacement on the Market?
27 Feb 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Zack and Ralph talk to Jed Kennedy and Doug Reinke from Bluon Energy. Jed and Doug talk about TdX 20, an R22 replace...
HST Podcast Free For All | 2
24 Feb 2018
Contributed by Lukas
The guys talk a wide array of subjects from inspections to Extech and false rumors to new logos.
HVAC Vacuum Discussion & Update with Jason Obrzut
20 Feb 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Zack and Ralph discuss the do's and don'ts of HVAC evacuation. Jason Obrzut joins them in the second half of the sho...
Simplified HVAC Troubleshooting & Bonus Interview w/ Johnny Hall from "Let's Be Techs"
16 Feb 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Zack and Ralph discuss HVAC troubleshooting with a minimum number of tools. The guys decide what is REALLY needed t...
Matthew McKinney | ICOR |R290 Refrigerant (Propane)
13 Feb 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Zack and Ralph talk to Matt McKinney from ICOR International. Matt discusses R290 (propane) refrigerant. HVAC Shop...
The Worst Experiences in our HVAC Careers
09 Feb 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Zack and Ralph talk about some of their worst HVAC experiences. Ralph also discloses where he works.
Tom Jackson | Web Comfort BAS | ESP Zoning
06 Feb 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Zack and Ralph talk to Tom Jackson from Jackson Systems. The guys discuss the web comfort building automation system...
Zack Gets the Flu | Smart Probes | Updates
02 Feb 2018
Contributed by Lukas
In this episode Zack and Ralph talk about several subjects. Zack discusses his brush with the Flu, the guys talk smart probes, and the boys give updat...
Larry Cole | Workin' as a T.S.A.
30 Jan 2018
Contributed by Lukas
In this episode of HVAC Shop Talk, Ralph and Zack talk to Larry Cole about being a technical service advisor. Larry worked as a TSA for Rheem/Ruud and...
The Dangerous Future of Refrigerants | Ralph's Big Change
27 Jan 2018
Contributed by Lukas
In this episode of HVAC Shop Talk the guys talk about the new HFC, HFO and HC refrigerants. Ralph also announces a big change in his working life.
Mark Spence | Haier Ductless HVAC
16 Jan 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Zack and Ralph talk to Mark Spence from Haier. Mark sheds light on the Haier line of euipment, new products coming f...
Sporlan Round Table | EPA, Refrigerants, EEV & TEV, AHR, New Products
13 Jan 2018
Contributed by Lukas
Ralph, Zack and Brent Ridley from the Tool Pros podcast sit down with a group of Sporlan's best at their facility in Washington, MO. Ben Johnson - com...
#SW 1/10/18 | Open Discussion | Amprobe & SWAG Giveaway
11 Jan 2018
Contributed by Lukas
Audio podcast version of #SWAGWednesday from 1/10/18.
James Bowman | Acid Away & Leak Freeze | Rectorseal AHR Announcements
09 Jan 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Zack and Ralph talk to James Bowman. James talks about Acid Away & Leak Freeze from Rectorseal. He also gives us an ...
NATE (North American Technical Excellence) Practice Exam #1
06 Jan 2018
Contributed by Lukas
In this episode of HVAC Shop Talk Ralph and Zack take 2 N.A.T.E. pratice tests. Follow along and see how you guys perform!
#SW 1/3/18 | Heat Pumps in the Cold | Nasty Job Sites | IRC-110 Giveaway
04 Jan 2018
Contributed by Lukas
On this week's #SWAGWednesday live stream Ralph and Zack talk a variety of issues. They also give away two Amprobe IRC-110's and some SWAG.
HVAC Systems | Repair vs. Replace
01 Jan 2018
Contributed by Lukas
In this podcast Zack and Ralph discuss the age old question - do I repair or replace my HVAC system? The boys discuss refrigerants, financing, and hig...
#SWAGWednesday 12/27/17 |Bosch, the NEWS, and More!
28 Dec 2017
Contributed by Lukas
#SWAGWednesday from 12/27/17. The Boys are getting famous thanks to "the NEWS" publication. Bosch questions answered.
Bosch Inverter Trailer | Service Call | Christmas Plans
23 Dec 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Zack and Ralph talk about the Bosch display trailer, service calls, and Christmas plans. Thanks to all of our great ...
#SWAGWednesday | 12/20/17 | Podcast War, Boschmobile, Q & A, Plus More!
21 Dec 2017
Contributed by Lukas
In this episode of HVAC Shop Talk the boys have the 12/20/17 edition of #SWAGWednesday. Enjoy the many discussions!
Tom Jackson | Jackson Systems | The AHR Expo Experience
19 Dec 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Zack and Ralph talk to old buddy Tom Jackson. Tom tells the boys all about his experiences at various AHR Expos. Tom...
Corbett Lunsford | Home performance Guru | 2
15 Dec 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Ralph and Zack continue their talk with home performance leader Corbett Lunsford. In the opening Zack and Ralph disc...
#SWAGWednesday | 12/13/17 | Amprobe, BluVac and Jackson Systems
14 Dec 2017
Contributed by Lukas
This episode of HVAC Shop Talk is the audio from the 12/13/17 #SWAGWednesday live stream on the HVAC Shop Talk YouTube channel.
Corbett Lunsford | Home Performance Guru | 1
12 Dec 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Zack and Ralph talk to Corbett Lunsford. Corbett is a leader in the home performance field. He talks about how he be...
HVAC Duct System Types, Sizing, and Materials
08 Dec 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Zack Psioda and Ralph Wolf discuss HVAC duct system design, types, and more.
HVAC Trade School, R-Log, iManifold and More | Jason Obrzut
05 Dec 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Ralph and Zack talk to Jason Obrzut. Jason works as a trade school instructor, assists oin the R-Log application for...
Zack and Ralph's Favorite HVAC Tools
02 Dec 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Ralph and Zack talk about their favorite HVAC install and service tools.
Small Business Hiring, Operation and Teammates | Tersh Blissett |Part 2
28 Nov 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Ralph and Zack continue their discussion with successful businessman (and podcaster) Tersh Blissett.
Small Business Hiring, Operation and Teammates | Tersh Blissett | Part 1
21 Nov 2017
Contributed by Lukas
In this episode of the HVAC Shop Talk podcast Ralph and Zack talk to Tersh Blissett. Tersh is the owner of Tri-Star Heating, Air & Plumbing. He is als...
Bosch Heat Pump Inverter Round Table
18 Nov 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Ralph and Zack discuss the new Bosch Heat Pump air to air inverter. This system has been a hot topic for the last se...
HVAC Round Table with Zack & Ralph
14 Nov 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Ralph and Zack discuss a variety of subjects. Included in this discussion are several subjects - TXVs, EEVs, drain p...
The Dirty Maintenance Man | Lex Vance | Part 2
10 Nov 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Zack and Ralph continue their discussion with Lex Vance from the Dirty Maintenance Show on YouTube. Ralph and Zack a...
The Dirty Maintenance Man | Lex vance | Part 1
07 Nov 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Zack and Ralph talk to Lex Vance from the Dirty Maintenance Show on YouTube.
BONUS | Amprobe Prize Podcast
05 Nov 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Zack discusses the next prize giveaway on 11/25/17.
Stop Leak and Refrigerant Oil Additives | John Pastorello
03 Nov 2017
Contributed by Lukas
In this podcast John Pastorello explains what refrigerant oil additives do inside the system and why he will never use any of them.
The POE Problem | John Pastorello
31 Oct 2017
Contributed by Lukas
Ralph and Zack interview John Pastorello about a condition called "The POE problem". John has studied oils and refrigerant additives for many years an...
Heat Exchanger Troubleshooting | Joe Feger | 2
27 Oct 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Zack and Ralph continue their conversation with Joe Feger. During the intro Ralph discloses what he learned at Haier...
Heat Exchanger Troubleshooting | Joe Feger | 1
24 Oct 2017
Contributed by Lukas
In this episode Ralph and Zack conduct 2 interviews. In the opening the boys talk to Natalie- a young lady that had an interesting interview with a pl...
Geothermal Heating and Cooling | Tim Uzar | 2
20 Oct 2017
Contributed by Lukas
Part 2 of the episode with Tim Uzar on Geothermal. Sign up for the email list - http://eepurl.com/c2eywf Facebook group - https://www.facebook.com...
Geothermal Heating and Cooling | Tim Uzar | 1
17 Oct 2017
Contributed by Lukas
In this episode Ralph and Zack talk geothermal heating and cooling with Tim Uzar. Tim is an experienced geothermal installer from the greater Atlanta,...
Boiler Basics | Larry Cole | Part 2
13 Oct 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Zack Psioda and Ralph Wolf continue talking boilers (and more) with Larry Cole. Chattahoochee Technical College Ca...
Boiler Basics | Larry Cole | Part 1
10 Oct 2017
Contributed by Lukas
In this episode Larry Cole teaches Ralph and Zack the basics of boilers. In the intro Ralph and Zack discuss common objections and advantages of inver...
Refrigeration Technologies | John Pastorello | 2
06 Oct 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Zack and Ralph continue their conversation with John Pastorello with Refrigeration Technologies. The guys discuss co...
BONUS | EWC Zoning Giveaway
05 Oct 2017
Contributed by Lukas
Check out the EWC Zoning giveaway!! EWC Zoning Video - https://www.youtube.com/watch?v=msLdSue_taI Email List - http://eepurl.com/c2eywf
Refrigeration Technologies | John Pastorello | 1
03 Oct 2017
Contributed by Lukas
Zack and Ralph talk to John Pastorello from Refrigeration Technologies. Refrigeration Technologies - https://www.refrigtech.com/ Join the email list -...
Department of Energy Ruling | Part 2
28 Sep 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Ralph Wolf and Zack Psioda continue their discussion concerning the Department of Energy's 2016 Ruling on SEER ratin...
Department of Energy Ruling | Part 1
26 Sep 2017
Contributed by Lukas
Zack Psioda and Ralph Wolf discuss DOE regulations that went into place last year. Zack and Ralph discuss dry charge systems, changing equipment UL li...
Amprobe ACD 14 Pro Giveaway Details
24 Sep 2017
Contributed by Lukas
In this short podcast Zack discusses how to win an Amprobe ACD14Pro on 9/30/17. He also tries to prank Ralph Wolf who is at the Casino in NC. Join the...
BONUS |EPA Regulations & Future Refrigerants | Mark Menzer | Danfoss
22 Sep 2017
Contributed by Lukas
In this bonus episode of HVAC Shop talk Ralph and Zack talk to Mark Menzer from Danfoss. Mark discusses some upcoming regulatory changes in the world ...
BONUS |HFC, HFO, and HC Refrigerants | Torben Funder-Kristensen | Danfoss
21 Sep 2017
Contributed by Lukas
In celebration of Danfoss refrigerant week HVAC Shop Talk has invited Torben Funder-Kristensen from Danfoss on the show. HFC, HFO and HC refrigerants ...
What makes a Technician? | Jim Bergmann | 3
19 Sep 2017
Contributed by Lukas
In this episode of the HVAC Shop Talk podcast Ralph and Zack finish their conversation with Jim Bergmann. Don't forget about the Zoomlock giveaway!! T...
BONUS | Sporlan Zoomlock Giveaway
18 Sep 2017
Contributed by Lukas
In this episode Ralph and Zack talk about the rules for the upcoming Zoomlock giveaway. ZoomLock Refrigerant Fittings Testimonial Clips Video HVAC S...
What Makes a Technician? | Jim Bergmann | 2
15 Sep 2017
Contributed by Lukas
In this episode of HVAC Shop Talk Ralph and Zack continue their conversation with Jim Bergmann from MeasureQuick. Jim talks about the criteria for bec...
What Makes a Technician? | Jim Bergmann | 1
13 Sep 2017
Contributed by Lukas
In this episode of the HVAC Shop Talk podcast Ralph and Zack interview Jim Bergmann. Jim talks about the difference between a mechanic and a technicia...
Bosch Heat Pump Inverter | Dustin Gregoire |Part 2
08 Sep 2017
Contributed by Lukas
In this episode of the HVAC Shop Talk podcast Ralph and Zack finish their conversation with Dustin from Bosch Thermal Technologies. The Facebook group...